PDA

View Full Version : 400ex rear linkage?



IMSROLL450R
10-24-2007, 10:01 AM
I have an 07 400ex that my girlfriend rides and wondered if there is a linkage for the rear to make it ride a little better. I am getting some axis for the front but want to loosen the rear up with a different linkage if there even are any.

Mellow Yellow
10-24-2007, 11:25 AM
Between the spring and the shock adjustment, you should be able to soften it up quite a bit without changing the linkage. Have you tried that allready?

IMSROLL450R
10-24-2007, 12:16 PM
Yeah I was just lookin for a different leverage ratio so it wouldnt buck quite as bad. Shes complaining about the ride.

97WarriorRider
10-24-2007, 02:08 PM
Try GTT

400ftm
10-24-2007, 02:11 PM
did you adjust the rebound on the bottom of the shock? that would help wit bucking

10-24-2007, 02:35 PM
i made the rebound a quarter turn to the right from tock factory settings and it made all the difference. Felt like a dream over factory with just a quarter turn

Big - D Racing
10-26-2007, 01:51 AM
ELKA, I run Elka long travel rear shock with the linkage. It's not a cheap setup but for the 400 there is no better.

10-26-2007, 03:22 AM
i have the gt thunder rear linkage and revalve on my wifes 400ex...100x better for that rear end buck... c&d claims the same results with revalve only, no linkage

IMSROLL450R
10-26-2007, 06:43 AM
Thanks for all the info guys thats exactly what I was looking for!!!!!! Probably going to get a GTT link to match the one in my 450. Thanks again!