PC 2000 upper hose

[pimpt250r]

the hose is offset to the side for the PV ,which hose do you run ,and where to get it,checked the duncan site they show nothing ,Id rather not go buy universal hose if they make 1 that works anybody with any pics or links of what works--I have an 87 so it says theres a different hose

Its not like a coolhead ,the PV is in the way and the coolhead hose is in front --this 1 is to the side
heres a link of what it looks like
http://www.duncanracing.com/prods/PC220265/

[pimpt250r]

I cant be the only 1 who has a PC2000 cylinder

[250r4life]

i used the stock hose but just cut it and rotated it...

i would just go get some hose from autozone or checker if i was you...

either way, just make sure there arent any kinks in it...

[pimpt250r]

theres no way my stock 87 hose will work cut or not,,there website says the 88-89 hose will work ,,I am looking for people that can show me how they ran it for Ideas, no bootleg crap on my ride anywhere soI wanna see some Ideas or if someone can show me how there stock 88 lines go from the top hose to cylinder ,and I'll just buy the 88/89 hose

do you have a pic you can show me ,,,Imalso well aware that there should be no kinks or binds in the hose

[250r4life]

there you go... the stock 89 hose rotated and shortened...

[250r4life]

Originally posted by pimpt250r
no bootleg crap on my ride anywhere

lol... bootleg huh? now how exactly is a radiator line from CHecker bootleg? it is the exact same material, and will actually probably fit better, and is quite a bit less expensive...

it wont look bad by any means whatsoever...

whatever floats your boat man...

if you like paying top dollar for parts, i've got plenty i'll sell ya :D

[pimpt250r]

nothing against bootleg,I just beleive doing it right the 1st time ,and if i run an universal hose it would have to be atleast 8 or so inches longer to make that retarted Z bend
,and I dont need any help spending money hahahahaha,

thanks for the pic can ya show me where it comes from the radiator, I will probably add a inline cooler and take that stress off the twist

[Aceman]

Originally posted by pimpt250r
I will probably add a inline cooler and take that stress off the twist

I though inline coolers WERE bootleg crap!:confused:

[pimpt250r]

that was letting him know Im not completly opposed to it

[wilkin250r]

I never cut and rotated mine. It wanted to kink right at the head, but an extra hose clamp at that spot forces it to keep it's shape.

I'll probably revisit it and fix it correctly when I upgrade my radiator. But for now, it works like a charm.

[250r4life]

Originally posted by pimpt250r
nothing against bootleg,I just beleive doing it right the 1st time ,and if i run an universal hose it would have to be atleast 8 or so inches longer to make that retarted Z bend
,and I dont need any help spending money hahahahaha,

thanks for the pic can ya show me where it comes from the radiator, I will probably add a inline cooler and take that stress off the twist

oh oh oh... ok... now i understand...

for some reason i wasnt thinking about how the 86-87 radiators make a 90 degree turn, and the 88-89 radiators come straight out...

my bad...

that is a good question how to do it...

i actually ended up with a 87 radiator on mine, and i cut some of it off before it made that turn, to make it similar to the 89 radiator... but i imagine you dont want to do that...

[pimpt250r]

It was just something I never thought about until now ,
,figures though,
I new there was gonna be some hangups I just wanna ride the damn thing,

I thought about cutting the neck down on the radiator and using a compression fitting but with my luck I will oblong the hole and screw it all up,LOL and I dont want that

whats crazy is it seems like its 1 of the hardest spots to get a good pic of when people take pics of there R's its always the pipe side ----like we havent seen an FMF on an R b4

[kustomfab2003]

370R with inline 20 fin cooler and stock hose on a PWR radiator.

Josh

http://i150.photobucket.com/albums/s94/kustomfab2003/IMG_0655.jpg

[brandon72396]

on my 87 i just cut the hose and put a elbow in it so it wouldn't kink