jd ??????????

[outlaw11]

ok so im at 954 ft above sea used blue needle mixutre is 1 1/8 main 160 thick o ring it doesnt stumble off idle or nothin very impressed with kit after struggling with the dyno jet kit but it feels strong through second and then kinda weakens i guess you should say weather is 60-70 degrees here should i go up to 165 and go to a 48 pilot if so will i have to change the mixture a little again thanx !!! mods are hmf pipe and k&n filter lid on

[bossman525]

Originally posted by outlaw11
ok so im at 954 ft above sea used blue needle mixutre is 1 1/8 main 160 thick o ring it doesnt stumble off idle or nothin very impressed with kit after struggling with the dyno jet kit but it feels strong through second and then kinda weakens i guess you should say weather is 60-70 degrees here should i go up to 165 and go to a 48 pilot if so will i have to change the mixture a little again thanx !!! mods are hmf pipe and k&n filter lid on
take the blue needle out put the red needle in, and with your mods i would go up to a 165 or 168 main with the stock pilot you will probably be about 1 3/4 or 2 full turns on your mixture. the blue needle is for cold weather, so i think the red needle will make a difference for you

[outlaw11]

k heres my settings 165 m 2 turns mix red needle 5th pos it blows a little smoke it sometimes if i hit the throttle repeadtly it will flood a little should i back the main down to a 160 or what should i do it runs really good but like i said it blows a little smoke and it floods sometimes when i repeatdly hit the throttle

[Evasiveone]

Move the clip on the red needle to the 4th position down.