November Quad of the Month entry thread, MX quads

[TheFontMaster]

This month's contest will be for only MX quads. The poll will go up next week. Here are the links to the rules, and the Mods list to fill out, and post with your quad. Have fun.

Rules:
http://www.exriders.com/vbb/showthread.php?s=&threadid=146713

Mods list:
http://www.exriders.com/vbb/showthread.php?s=&threadid=162941

[atvfrk10]

Chassis | Suspension | Controls:

Frame: Stock; gusseted
A Arms: Houser Longtravel +3
Swingarm: Houser Longtravel +2
Steering Stem: Houser Antivibe +2
Stbilizer: SRP
Axle: Durablue X-33
Carrier: Houser
Locknut: Durable
Hubs F|R: Stock / Durablue
Bars: Fasst Flex
Throttle/Clutch Lever: Terry Cable / Pro Design
Grips: Scott
Nerfs: AC
Bumper: IMS
Grab Bar: N/A
Front Shocks: Elka Quadrate
Rear Shock: Elka Double Rate
Brake Lines: StreamLine
Rotors F|R: Stock / Wave
Rims F|R: ITP Baja Black
Tires F|R: Kenda Klaw MXR



Body:

Plastic: Laker Custom
Graphics|Seat Cover: N/A
Number Backgrounds: Attack
Handguards: N/A
Bar Pad: Fasst
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Alba Big Bore / Alba Port and Polish
Bore & Stroke: -
Displacement: 440cc
Cam: Hotcam
Carburetor: 42mm FCR
Air Filter|Box: K&N / UM
Pipe|Silencer: Curtis Sparks
Clutch|Plates: Stock
Gearing F|R: Stock
CDI|Killswitch: Pro Armor
Cooling: Stock
Other: RMZ Starter Button

http://i104.photobucket.com/albums/m165/atvfrk10/DSC00225.jpg
http://i104.photobucket.com/albums/m165/atvfrk10/DSC00220.jpg
http://i104.photobucket.com/albums/m165/atvfrk10/DSC00230.jpg
http://i104.photobucket.com/albums/m165/atvfrk10/DSC00221.jpg
http://i104.photobucket.com/albums/m165/atvfrk10/DSC00219.jpg
http://i104.photobucket.com/albums/m165/atvfrk10/DSC00226.jpg

[mxdad423]

Chassis | Suspension | Controls:
2004 Kasea Skyhawk 90
Frame: Stock gusseted
A Arms: DC MotorSports
Swingarm: DC Motorsports Round Housing
Steering Stem: DC Motorsports Anti-Vibe
Stbilizer: N/A
Axle: Dura Blue +5
Carrier: DC Mortorsports Billett Alum.
Locknut: Dura Blue
Hubs F|R:Stock
Bars:Maximum RPM ATV Race Bars
Throttle/Clutch Lever:Stock
Grips: Scott
Nerfs: AC Propegs
Bumper: AC
Grab Bar:Stock
Front Shocks: Elka Dual Rate with Risi's
Rear Shock: Elka Dual Rate with Resi
Brake Lines:Steel Braided
Rotors F|R: Stock
Rims F|R:Front ITP / Rear Maximum RPM Cast Alum.
Tires F|R:Front Razr's / Rear Carlisle Snow Hog



Body:

Plastic:Stock with Race Cut
Graphics|Seat Cover: Custom Graphics and Verde Powersports Custom Seat Cover
Number Backgrounds: Custom
Handguards: Powermadd
Bar Pad:Maximum RPM
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: VPS Ported and Polished CYL. and Head
Bore & Stroke: 52MM Bore and 42mm Stroke
Displacement: 90 cc
Cam:N/A
Carburetor: Keihn 28mm Flatside
Air Filter|Box:Uni Pod Filter and Outerwear
Pipe|Silencer: Trinity
Clutch|Plates: Malossi
Gearing F|R:19F / 28R
CDI|Killswitch: PVL Ign. and Pro Design Teather
Cooling: Air Cooled


http://i196.photobucket.com/albums/aa153/mxdad0423/finishedkasea902007005.jpg

http://i196.photobucket.com/albums/aa153/mxdad0423/finishedkasea902007003.jpg

<a href="http://photobucket.com" target="_blank"><img src="http://i196.photobucket.com/albums/aa153/mxdad0423/finishedkasea902007001.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>
http://i196.photobucket.com/albums/aa153/mxdad0423/finishedkasea902007008.jpg

http://i196.photobucket.com/albums/aa153/mxdad0423/finishedkasea902007002.jpg

http://i196.photobucket.com/albums/aa153/mxdad0423/cernicssc255.jpg



__________________

[Alex68]

2005 Yamaha YFZ450

Chassis | Suspension | Controls:

Frame: stock; gussted
A Arms: Houser +2 longtravel
Swingarm: Walsh
Steering Stem: Houser +1 antivbe
Stbilizer: Denton
Axle: Team Fire stick
Carrier: Lonestar
Locknut: Stock
Hubs F|R: Front stock ; rear Team
Bars: Protaper
Throttle/Clutch Lever: Honda 400ex throttle with TRX90 lever
Grips: Oury
Nerfs: AC
Bumper: AC
Grab Bar: AC
Front Shocks: Elka
Rear Shock: Elka
Brake Lines: Galfer stainless
Rotors F|R: Stock
Rims F|R: Douglas
Tires F|R: Kenda, ITP holeshots



Body:

Plastic: Stock
Graphics|Seat Cover: Nmotion
Number Backgrounds: Nmotion in pics, Updog
Handguards: Powermadd
Bar Pad: Protaper
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Nmotion port & polish, +1 stainless steel valves
Bore & Stroke: +1 crank (06 crank)
Piston: Wiesco 13:5:1
Displacement: 450
Cam: Webbs
Carburetor: Stock
Air Filter|Box: Stock; Fuel Customs Filter and intake
Pipe|Silencer: Nmotion
Clutch|Plates: Hinson
Gearing F|R: Stock
CDI|Killswitch: Prodesign
Cooling: Stock
Other: Dynatech programable cdi, Timebomb hour meter, Walsh Subframe braces, Gutted wireharness, YZ kill button as starter, Yamaha Resistor kit.

http://i36.photobucket.com/albums/e47/RacerX68/404.jpg

http://i36.photobucket.com/albums/e47/RacerX68/401.jpg

http://i36.photobucket.com/albums/e47/RacerX68/399.jpg

http://i36.photobucket.com/albums/e47/RacerX68/100_1441.jpg

http://i36.photobucket.com/albums/e47/RacerX68/100_1432.jpg

[gcart2]

trx400ex 04
Chassis | Suspension | Controls:

Frame:stock until broken
A Arms:lsr
Swingarm:lsr
Steering Stem:stock
Stabilizer:Gibson
Axle:lsr
Carrier:rebuilt
Locknut:RAD
Bars:Renthal
Throttle/Clutch Lever: cr250
Grips:scott
Nerfs:pro armour
Bumper:pro armour
Front Shocks:fox floats
Rear Shock:being rebuilt
Rims F|R:stock
Tires F|R:maxxis razr



Body:

Plastic:maier
Graphics|Seat Cover:one industries
Bar Pad:Thor



Engine|Drive System:

Bore & Stroke:hi comp. piston
Displacement:397cc
Cam: hotcam
Carburetor:stock
Air Filter|Box:outerwear's
Pipe|Silencer: fmf power core 4
Clutch|Plates: hinson
CDI|Killswitch:pro design
Cooling:air scoops


http://i88.photobucket.com/albums/k181/gcart2/DCAM0052.jpg
http://i88.photobucket.com/albums/k181/gcart2/DCAM0051.jpg
http://i88.photobucket.com/albums/k181/gcart2/DCAM0050.jpg
http://i88.photobucket.com/albums/k181/gcart2/DCAM0049.jpg

[blaster99]

Chassis | Suspension | Controls:

A Arms: SMS +5/58 +1
Swingarm: lsr +2
Steering Stem: lsr
Stbilizer: gibson
Axle: lsr axcaliber
Carrier: lsr
Locknut: lsr
Hubs F|R: stock/worrior
Bars: fasst flexx
Throttle: stock
Clutch Lever: asv
Nerfs: raptor 660 propegs
Bumper: dg national
Grab Bar: ac
Front Shocks: elka tripple rate elite
Rear Shock: elka dual rate elite
Brake Lines: galifer
Breaks F|R: stock
Rims F|R: hipers
Tires F|R: Maxxis razrs

----------------------------------------------

Body:

Plastic: Maier front tauras hood
Graphics | Seat Cover: team pb grafics/ 2 tone seat cover
Number Backgrounds: spastic
Handguards: F7
Bar Pad: fasst
Fuel Tank: stock

----------------------------------------------

Engine | Drive System:

Cylinder | Head: arisal
Bore & Stroke: whatever an arisal is whit a stock stroke
Displacement: 195 im assuming
Carburetor: cpw 35mil
Air Filter | Box: pb
Pipe | Silencer: F7 shorty
Clutch | Plates: hinson basket/dp plates
Gearing F|R: changes from time to time
Killswitch: pro designe
Other: waaayyy to much time money and effort.. to put into a blaster.


http://img.photobucket.com/albums/v703/blaster99/racebike07016.jpg
http://img.photobucket.com/albums/v703/blaster99/racebike07018.jpg
http://img.photobucket.com/albums/v703/blaster99/racebike07019.jpg
http://img.photobucket.com/albums/v703/blaster99/racebike07013.jpg
http://img.photobucket.com/albums/v703/blaster99/racebike07007.jpg
http://img.photobucket.com/albums/v703/blaster99/racebike07003.jpg
http://img.photobucket.com/albums/v703/blaster99/racebike07004.jpg

[bigbadbubba]

Chassis | Suspension | Controls:

Frame: stock
A Arms: stock
Swingarm: stock
Steering Stem: stock with fuel atv big bar clamps
Stbilizer: none
Axle: stock
Carrier: stock
Locknut: stock
Hubs F|R: stock painted yellow
Bars: fast flexx
Throttle/Clutch Lever: stock/ asv brake and clutch
Grips: pro grip
Nerfs: extreme fabrication
Bumper: tag
Grab Bar: stock
Front Shocks: stock
Rear Shock: stock
Brake Lines: stock
Rotors F|R: stock
Rims F|R: stock/ itp pro lock with pced ring
Tires F|R:stock / stock



Body:

Plastic: stock cut with carbon fiber maier shrouds
Graphics|Seat Cover: monster / quad tech
Number Backgrounds: custom DTP racing
Handguards: powermadd
Bar Pad: flexx
Fuel Tank: IMS



Engine|Drive System:

Cylinder|Head: stock
Bore & Stroke: stock
Displacement: stock
Cam: stock
Carburetor: stock
Air Filter|Box: pro design / pro design
Pipe|Silencer: sparks/ sparks
Clutch|Plates: stock
Gearing F|R: 13 front/ stock rear
CDI|Killswitch: pro design
Cooling: stock
Other: carbon fiber beak, yz style kill button, random pced parts,

http://i94.photobucket.com/albums/l95/chillinsk8err/Picture115-2.jpg
http://i94.photobucket.com/albums/l95/chillinsk8err/Picture117.jpg
http://i94.photobucket.com/albums/l95/chillinsk8err/Picture118.jpg
http://i94.photobucket.com/albums/l95/chillinsk8err/Picture119.jpg
http://i94.photobucket.com/albums/l95/chillinsk8err/Picture122.jpg
http://i94.photobucket.com/albums/l95/chillinsk8err/Picture140.jpg
http://i94.photobucket.com/albums/l95/chillinsk8err/Picture142-1.jpg
http://i94.photobucket.com/albums/l95/chillinsk8err/Picture143.jpg
http://i94.photobucket.com/albums/l95/chillinsk8err/Picture146.jpg
http://i94.photobucket.com/albums/l95/chillinsk8err/Picture163.jpg
http://i94.photobucket.com/albums/l95/chillinsk8err/Picture164.jpg
http://i94.photobucket.com/albums/l95/chillinsk8err/Picture165.jpg
http://i94.photobucket.com/albums/l95/chillinsk8err/Picture168-1.jpg

[quadracer707]

2004 Yamaha YFZ450
Chassis | Suspension | Controls:

Frame: Stock 06 with gusset kit
A Arms: Walsh +3
Swingarm: Walsh
Steering Stem: Houser
Stbilizer: Lost Creek Cycles
Axle: RPM
Carrier: Gibson
Locknut: Lonestar
Hubs F|R: hardkor fronts 250r rear
Bars: fasst flexx
Throttle/Clutch Lever: stock/ASV
Grips: Spider
Nerfs: X-factor
Bumper: Stock/blingstar
Grab Bar: AC
Front Shocks: Fox
Rear Shock: Elka
Brake Lines: Streamline
Rims F|R: ITP/DWT
Tires F|R: Maxxis



Body:

Plastic: Laker
Graphics|Seat Cover: XCbob.com/ Lost Creek Cycles
Number Backgrounds: Attack
Handguards: Powermadd
Bar Pad: Flexx
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Ported
Bore & Stroke: 97mm
Displacement: 450
Cam:Hot cams
Carburetor: 43mm
Air Filter|Box: Pro design
Pipe|Silencer: Curtis sparks
Clutch|Plates: EBC
Gearing F|R: 13/38
CDI|Killswitch: Dyna tech/Pro Armor

[quadracer707]

2nd

[quadracer707]

3rd

[quadracer707]

4th

[quadracer707]

final

Chassis | Suspension | Controls:

Frame:Stock Gusseted and PC
A Arms:Walsh
Swingarm:Stock
Steering Stem:Stock
Stbilizer:Gibson
Axle:RPM D2
Carrier:Stock
Locknut:Stock
Hubs F|R:Stock PC flat black
Bars:Pro Taper Reed
Throttle/Clutch Lever:Stock
Grips:Pro Taper
Nerfs:X factor
Bumper:Blingstar
Grab Bar:Rath
Front Shocks:Fox Evol
Rear Shock:Axis
Brake Lines:Streamline
Rotors F|R:EBC
Rims F|R:Hiper/Burgard
Tires F|R:MXR6



Body:

Plastic:Laker custom
Graphics|Seat Cover:Trick Racing
Number Backgrounds:Trick Racing
Handguards: None
Bar Pad:Pro Taper
Fuel Tank:Stock



Engine|Drive System:

Cylinder|Head:Ported and polished
Bore & Stroke:Stock
Displacement:450
Cam:Web +5
Carburetor:Stock Bored out
Air Filter|Box:Stock cut in half
Pipe|Silencer:Sparks BC
Clutch|Plates:Stock
Gearing F|R:15/37
CDI|Killswitch:Stock/pro design
Cooling:Stock
Other:Wrcrank



http://i77.photobucket.com/albums/j62/cumongrljusridit/New106.jpg
http://i77.photobucket.com/albums/j62/cumongrljusridit/100_0967.jpg
http://i77.photobucket.com/albums/j62/cumongrljusridit/100_0944.jpg
http://i77.photobucket.com/albums/j62/cumongrljusridit/100_0968.jpg
http://i77.photobucket.com/albums/j62/cumongrljusridit/100_0954.jpg

[baker400ex]

Chassis | Suspension | Controls:

Frame: stock pc red
A Arms: stock pc red
Swingarm: Lonestar +1.25
Steering Stem: stock
Stbilizer: none
Axle: Lonestar Axcalibar +4
Carrier: Lonestar Twin row Billet
Locknut: stock
Hubs F|R: stock pc white
Bars: Tag X5 Gold
Throttle/Clutch Lever:ASV
Grips: Renthal
Nerfs: Pro Armor Fat Peg
Bumper: DG National Series,PC Black
Grab Bar: stock polished
Front Shocks: Elka Triple rate compression adj. w/ssd
Rear Shock: stock
Brake Lines: stock
Rotors F|R: stock
Rims F|R: Hiper Dual Beadlock rear/Hiper Single Beadlock front
Tires F|R: ITP Holeshot mxr6/Holeshot sx



Body:

Plastic:Stock,White
Graphics|Seat Cover: Premis-Cale Downen Signature Graphics/Factory Effex cover
Number Backgrounds: none
Handguards: Cycra Stealth,White
Bar Pad: tag metals
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: stock
Bore & Stroke: stock
Displacement: 450
Cam:stock
Carburetor:Curtis Sparks Jet Kit
Air Filter|Box: Sparks/no lid
Pipe|Silencer: Curtis Sparks full system w/Ceramic SS Coating
Clutch|Plates: stock
Gearing F|R: 14/38
CDI|Killswitch: Vortex/Pro-Design
Cooling: stock
Other:crf killswitch-start button/WC Block-off

http://i90.photobucket.com/albums/k257/foxryda4life400ex/IMG_1470.jpg
http://i90.photobucket.com/albums/k257/foxryda4life400ex/IMG_1464.jpg
http://i90.photobucket.com/albums/k257/foxryda4life400ex/IMG_1469.jpg
http://i90.photobucket.com/albums/k257/foxryda4life400ex/IMG_1466-2.jpg

[Pro1200]

<b>1986 Honda TRX250R</b>

Chassis | Suspension | Controls:

Frame: Stock Gusseted
A Arms: WALSH Longtravel +3
Swingarm: LonseStar -1
Steering Stem: WALSH Anti-vibe
Stbilizer: None
Axle: LoneStar Axcaliber
Carrier: LoneStar
Locknut: LoneStar anti-fade
Hubs F|R: Stock PCed
Bars: TAG T2 cr-lo
Throttle: Stock
Clutch Lever: MSR
Nerfs: AC Pro-Peg
Bumper: AC Stadium
Grab Bar: AC widebar
Front Shocks: Pep ZPS
Rear Shock: Pep ZPS
Brake Lines: Galfer/Steamline SS
Brakes F|R: Stock/Wave Rotor
Rims F|R: Douglas Yellow label/ Douglas Beadlocks
Tires F|R: Razr MX’s all round

----------------------------------------------

Body:

Plastic: OEM white/race cut front
Graphics | Seat Cover: ECATV graphics/ Duncan seat cover
Number Backgrounds: Duncan red
Handguards: rd/blk PowerMadd Star (not pictured)
Bar Pad: WALSH anti-vibe bar CLAMP
Fuel Tank: Stock w/ Quad-Tech carbon fiber cover

----------------------------------------------

Engine | Drive System:
Cylinder | Head: Ported
Bore & Stroke: 66x7i2
Displacement: 265cc
Carburetor: Keihin 34mm
Air Filter | Box: K&N /no lid
Pipe | Silencer: LRD Adjustable pipe and silencer
Clutch | Plates: Stock
Gearing F|R: Stock
Killswitch: Pro Design (not pictured)
Other: Boyseen Reeds, Quad-Tech Radiator shrouds and hood, All powdercoated, ASV brake lever, Hinson Brake pedal, AC belly skid(not pictured), NACS Mud caps (not pictured)


http://i20.photobucket.com/albums/b206/Pro1200/frontclose.jpg

http://i20.photobucket.com/albums/b206/Pro1200/leftsidehelmetbig.jpg

http://i20.photobucket.com/albums/b206/Pro1200/leftangle.jpg

http://i20.photobucket.com/albums/b206/Pro1200/rearend.jpg

http://i20.photobucket.com/albums/b206/Pro1200/rightangle.jpg

http://i20.photobucket.com/albums/b206/Pro1200/seatview.jpg

[CTmxyfz]

2004 Yfz450

Chassis:

Walsh g33 a arms
Walsh -1" subframe
Walsh +1 steering stem
Walsh 04-05 style swingarm
Walsh overflow bottle
Walsh battery box(when im using my electric start motor)
Propegged/gussetted frame
Lonestar axle
Fox Evol DSC front shocks
Fox podium LSC rear shock
Streamline black braided dual front lines
Streamline silver rear line
Trx450r thumb throttle
Trx450r front master cylinder
Renthal CR double high bars
Hiper 4:1 front rims
Hiper 8x8 integrated rear rims
Razr MX hard compound tires front and rear
AC stadium front bumper
AC Blackine nerf bars
Gibson stabilizer

Motor:

04' motor with WR Crank Kickstart only!
CP 13.5:1 2 ring piston
BCS Performance ported head
GYTR kicker kit
GYTR hotstart kit
98' yz 250 kicker
PC'd side covers, etc.
Custom gutted harness done by me
Runs on c12
Pro Design intake
TC or Yoshi TRC exhaust

Body:
Stock white plastic custom cut
Had graphics.. lasted one ride, no longer there

Many more parts/plans to come in the future. Ill let the pics speak for the rest of it here.
http://i181.photobucket.com/albums/x85/alger388/P1010295.jpg
http://i181.photobucket.com/albums/x85/alger388/P1010293.jpg
http://i181.photobucket.com/albums/x85/alger388/P1010269.jpg
http://i181.photobucket.com/albums/x85/alger388/P1010266.jpg
http://i181.photobucket.com/albums/x85/alger388/P1010276.jpg

[jrspawn]

Chassis | Suspension | Controls:

Frame: Full Laeger Pro Trax True YZF Narrow frame CR500 Link
A Arms: Custom Burgards +4 made for the Laeger Chassis
Swingarm: Laeger Pro Trax CR500 linkage
Steering Stem: Laeger
Stbilizer: None
Axle: Lonestar
Carrier: Lonestar
Locknut: Lonestar
Hubs F|R: OEM
Bars: Tag T2
Throttle/Clutch Lever: ASV
Grips: oury
Nerfs: AC
Bumper: Duncan
Grab Bar: AC
Front Shocks: PEP Long travel
Rear Shock: PEP CR500 Link long travel
Brake Lines: Galfer braided
Rotors F|R: Galfer
Rims F|R: Douglas and Burgard Beadlocks
Tires F|R: Grooved Radials and Turf tamers



Body:

Plastic: OEM Honda 250r race cut(also pictured with White)
Graphics|Seat Cover: None/ceet
Number Backgrounds: ECATV
Handguards: Powermadd
Bar Pad: Pro taper
Fuel Tank: Clarke



Engine|Drive System:

Cylinder|Head: Its got a lil something something:)
Bore & Stroke: 97mm&stock
Displacement: 440
Cam:Stock
Carburetor: FCR
Air Filter|Box: UNI, custom metal intake, 250r box
Pipe|Silencer: TC Racing with custom headpipe
Clutch|Plates: Hinson
Gearing F|R:
CDI|Killswitch: Pro design
Cooling: Walsh Radiator and scoops
Other:A TON MORE!!! All Candy blue and Chrome!!! The pics dont even come close to doing it justice, but they give you an idea.

Thank you
Justin
http://i75.photobucket.com/albums/i309/jrspawn/LaegerYZ4400081.jpg
http://i75.photobucket.com/albums/i309/jrspawn/LaegerYZ4400161.jpg
http://i75.photobucket.com/albums/i309/jrspawn/LaegerYZ4400171.jpg
http://i75.photobucket.com/albums/i309/jrspawn/LaegerYZ4400241.jpg
http://i75.photobucket.com/albums/i309/jrspawn/LaegerYZ4400251.jpg
http://i75.photobucket.com/albums/i309/jrspawn/LaegerYZ4400271.jpg
http://i75.photobucket.com/albums/i309/jrspawn/LaegerYZ4400291.jpg
http://i75.photobucket.com/albums/i309/jrspawn/LaegerYZ4400331.jpg
http://i75.photobucket.com/albums/i309/jrspawn/LaegerYZ4400341.jpg
http://i75.photobucket.com/albums/i309/jrspawn/LaegerYZ4400381.jpg
http://i75.photobucket.com/albums/i309/jrspawn/LaegerYZ4400411.jpg
http://i75.photobucket.com/albums/i309/jrspawn/LaegerYZ4400421.jpg
http://i75.photobucket.com/albums/i309/jrspawn/NewLaegerYZhybrid0071.jpg
http://i75.photobucket.com/albums/i309/jrspawn/NewLaegerYZhybrid0031.jpg
http://i75.photobucket.com/albums/i309/jrspawn/NewLaegerYZhybrid0041.jpg
http://i75.photobucket.com/albums/i309/jrspawn/NewLaegerYZhybrid0111.jpg
http://i75.photobucket.com/albums/i309/jrspawn/NewLaegerYZhybrid0171.jpg
http://i75.photobucket.com/albums/i309/jrspawn/NewLaegerYZhybrid0181.jpg
http://i75.photobucket.com/albums/i309/jrspawn/NewLaegerYZhybrid0211.jpg

[kenjolly]

Chassis | Suspension | Controls:

Frame: DRX gusseted and powder coated
A Arms: dave carter +2
Swingarm: dave carter + 2
Steering Stem: stock
Stbilizer:
Axle: stock
Carrier: stock
Locknut: stock
Hubs F|R: stock
Bars: faast flex
Throttle/Clutch Lever: race
Grips: spider
Nerfs: XFR
Bumper: stock
Grab Bar: stock
Front Shocks: elka elite
Rear Shock: elka elite
Brake Lines: steel braided
Rotors F|R: stock
Rims F|R: douglas
Tires F|R: holeshot



Body:

Plastic: drx
Graphics|Seat Cover: graves custom
Number Backgrounds: graves custom
Handguards: d
Bar Pad: graves custom
Fuel Tank: graves custom



Engine|Drive System:

Cylinder|Head: metrakit pro race
Bore & Stroke:
Displacement: 70cc
Cam: metrakit pro race
Carburetor: 24mm Kiehin
Air Filter|Box: Uni
Pipe|Silencer: metrakit pro race
Clutch|Plates: koso
Gearing F|R: 20/30
CDI|Killswitch:
Cooling:
Other: pvl ignition
http://i207.photobucket.com/albums/bb133/kenjolly/DSC00011-1.jpg
http://i207.photobucket.com/albums/bb133/kenjolly/DSC00015.jpg
http://i207.photobucket.com/albums/bb133/kenjolly/DSC00016.jpg
http://i207.photobucket.com/albums/bb133/kenjolly/DSC00017.jpg
http://i207.photobucket.com/albums/bb133/kenjolly/DSC00009.jpg
http://i207.photobucket.com/albums/bb133/kenjolly/DSC00007.jpg