what's the secret to an easy clutch pull?

[800screws]

i have a fairly new cable which was lubed, and a works elite perch...what else do u need to do? i mean it's not that bad, but it's alot more pull than a new 450... any ideas.

[trailwart]

magura....

[Aceman]

Have you taken the clutch cable off the quad when you lubed it and verified the cable moves easily? I run a Magura but when I lube my throttle cable I take it all the way off the quad and hold it vertical. Then spray brake cleaner in the top and work the cable back and forth until it starts dripping out the end. Then spray the cable lube of your choice into it and work it back and forth. I just use wd40 or pb blaster but have heard the motion pro cable lube is best for this.

[ringoesroadking]

MSR perch and lever, about $50. three adjustments for fulcrum points. Works like a dream.

[bkconwayls1]

Magura. It's a little expensive, but nothing compares, you will not be dissapointed.

[250r4life]

Originally posted by ringoesroadking
MSR perch and lever, about $50. three adjustments for fulcrum points. Works like a dream.

i agree... i had one on my R, but i put the stock one back on cuz im selling the R... works great though!

I've got the perch and lever for sale if anybody is interested...

[mc_racer]

How much?

[svahle]

Are you running heavier clutch springs? If so you can expect a harder pull.

Oh and Magura is the way to go. I have one on my Dale.

[redrooster310r]

Originally posted by 800screws
i have a fairly new cable which was lubed, and a works elite perch...what else do u need to do? i mean it's not that bad, but it's alot more pull than a new 450... any ideas. i use a cr 250 perch and lever...cr 500 springs.... oem plates and fibers.... with a hinson basket and it pulls like buteer with out all that jazz......but nnot having to replace and service cables buy add a magura might be the ultimate....