piston help

[trx400EXtreme]

assuming i get a new piston this winter, even if i stay with the stock bore and only go with a high comp. piston can i use the stock sleeve w/o doing any modifications to it? thanks.

[CannondaleRider]

If your getting a new piston, on reasons of it being tired, then you will need to do something to the liner anyways.

If your getting a new piston, just for it being high compression....your better off just finishing off the stocker, then going with everything new, instead of putting a new piston in an old liner.

[trx400EXtreme]

Originally posted by CannondaleRider
If your getting a new piston, on reasons of it being tired, then you will need to do something to the liner anyways.

If your getting a new piston, just for it being high compression....your better off just finishing off the stocker, then going with everything new, instead of putting a new piston in an old liner. and does a top end kit come with a new sleeve?

[400exrider707]

You may be able to get away with just a hone and a piston, but being its an 02, I would just go over-bore and a larger piston.