Which Aftermarket CDI To Buy

[Lonestar_R]

I see there are few different brands on ebay. Which one if any are the best? Or which ones has anyone had any experience with? And is it a good idea to go with an aftermarket Coil also?

Are the AMR Stage 3's CDI's and the AMR Coils a good choice or not?

My Stepson's 300EX is in need of a Higher Rev Limit, cause this things bounces off the rev limiter way too quick. Thanks in advance

[2muchquad]

I just modded my stock one by drilling out a "certain" capacitor and eliminating the rev limiter copmpletely,unlike the aftermarket ones that only give a extra 1000 rpm or so..I also loose the limiter in reverse with this mod.

[SET THE STAGE]

sparks can mod your stock one for about 1500 more i think it was for only 75 bucks
http://www.alwaysopenmall.com/layouts/02/unsecure/item.asp?SiteID=223&DepartmentID=85&CategoryID=950&GroupID=7041&ItemID=36345&StartNum=1&Sort=&ShowPics=0&ListByCode=1&Brand=&GenderAgeGroupID=0&MaxPrice=&SearchString=&ItemCode=&IsOnlyOnSale=0&FromHomePage=0&FromFamily=0&ProductFamilyID=0&RelatedItemID=0

[Lonestar_R]

My local Honda dealer is a authorized sparks dealer. I wonder if I can get a little break on the price of that through them....hmmm

[SET THE STAGE]

Originally posted by Lonestar_R
My local Honda dealer is a authorized sparks dealer. I wonder if I can get a little break on the price of that through them....hmmm

it'd be worth a shot. i have one on mine and it works great. they even throw on a sparks decal to cover the outside of it lol


wish i had a sparks dealer near me. boo on that.

[TRX-330]

Originally posted by 2muchquad
I just modded my stock one by drilling out a "certain" capacitor and eliminating the rev limiter copmpletely,unlike the aftermarket ones that only give a extra 1000 rpm or so..I also loose the limiter in reverse with this mod.

how do you go abouts doing this

[2muchquad]

how do you go abouts doing this

I do it the same way that aftermarket companies want to charge people money to do this,except i found out how its done,your local you can check it out for yourself,i'll hook you up;)

[TRX-330]

hmm ill deff have to hit u up on that deal

[ridered92]

trx-330 check your PM's i sent you two

[dork]

stock CDI modded is the most reliable. most aftermarket CDI's are poor quality and cause weird problems down the road. drilling out your stock one isn't hard but it can ruin it if not done right.

[300ridr]

can anyone tell me where to drill it

[300ridr]

Originally posted by 2muchquad
I do it the same way that aftermarket companies want to charge people money to do this,except i found out how its done,your local you can check it out for yourself,i'll hook you up;)

could you tell me or show me how????? A pic please

[Tommy Warren]

don't leave us hangin!!!

[Grimzella]

i think we're hung out, and left to dry...

[rooster300ex]

that aint' cool man