Probably a stupid question

[LT10]

how can I relocate my key and stuff for aftermarket handle bars? I know I feel stupid asking this question:confused:

[JOEX]

Originally posted by LT10
how can I relocate my key and stuff for aftermarket handle bars? I know I feel stupid asking this question:confused:
You shouldn't need to... unless the newer models are that different:confused:

[nevadanotch]

What year is your 400EX? I have a 2005 and had to replace my bars after rolling it side over side down a dune. I located the neutral and back up lights in the front fender under the reverse switch and the key switch in the hood. I can send you pics if you want.

[EX LONERIDER]

here's where i placed mine after a diffrent set of plastics....

http://img216.imageshack.us/img216/356/ignitionrelocation005bt6.jpg (http://imageshack.us)


http://img216.imageshack.us/img216/8078/ignitionrelocation006ez4.jpg (http://imageshack.us)

[trxridr]

EX LONERIDER where did you get that bracket?

[LT10]

thanks guys and where did you get that braket EX LONERIDER

[EX LONERIDER]

the bracket came with my mayer plastics. you could probably order one or if you want even make one if you have the tooling. all it needs is a bolt hole and a large hole with a step notch for the ignition cylinder to go in.

[badcarz]

What size bars are you putting on? You can get clamps with holes for the lights and switch for 7/8 bars. Not sure for 1 1/8. I have a pair of renthals on mine with a billit clamp.

[WFO400]

check out Roxspeedfx.com I bought one of there "dash panels" and it works great on my 05, but I just used 7/8" bars. It's the same as the 450 if for some reason you can't find one for the ex.