atv handlebar bends [Archive]

atvrider26050

10-07-2007, 08:07 PM

i would like to know what handlebar bend is best for a z400?
i bought renthal cr highs and they are way too low...
would like to know what you other racers are running?

quad97

10-07-2007, 09:08 PM

I have a DVX and use renthal twinwalls in a carmichael high bend with a +1 stem. They are about stock height if you use 3/4 in tall adaptors to get the 1 1/8 clamp. These bars a little higher than a CR high.

250rmike

10-08-2007, 09:37 PM

try a quad bend alot higher than the cr bends

FREE RIDIN

10-08-2007, 11:04 PM

i'm running 1 1/8" cr high bend w/ a houser +1 stem and a lonestar clamp on a 400ex. perfect height for me

250rmike

10-09-2007, 09:25 AM

oh and i run cr highs on my quads in 1 1/8 tag and renthals

TRX450RACER174

10-09-2007, 06:16 PM

Tag or Pro Taper make a Cr double high bend, I am running a +2 LSR stem with ATV Hi bend Flexx bars.

04TRX400EX

10-11-2007, 08:43 PM

If you don't want to change the steering stem and/or mount, go with an ATV bend bar rather than a MX bend (like the CR). I personally went with Pro Taper's ATV Lo bend. They're close to stock 400EX bars but have a slightly larger pullback sweep. Go onto Renthal or Pro Taper's website to view the chart of different bends. Either way, I recommend Pro Taper.