Wicked Fast Blaster???

[kfxracer]

I am currently riding my dad's old kfx400, but I am only 5'4", and it's a little much to throw around in the air. I am thinking of buying a blaster, and I want something like the pic below, but I want it to be able to keep up with or beat a kfx400. Is that possible? What parts would it take? How much $$$ would it take? And, I want to run on premium pump gas. I don't need the beadlocks, or wicked suspension, just something that handles good and is wicked fast! I do want a +2 or +3 swingarm, and maybe +2 width all around. I was thinking about a Vito's full 240 cylinder kit, stroker crank, Toomey B1 Kit, and V-Force 3 reed valve. I know I'll need a bigger carb, but I don't know all the little stuff I'll need. Plus, I know it'll take a lot of money, but try to reccomend cheap parts.Thanks!!!

[kfxracer]

here, I just found exactly what I want:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=6725&viewitem=&item=140162551305&_trksid=p3907.m29

How much would it take to build this quad?

[Jake250ex]

Im gonna say

$6000 conservative

$8500 doing it right


Too much money for a Blaster!

Buy a pipe, get it ported and a carb. I wouldnt mess with the bore! Your talkin at least 10hp gain with that.

CT sells a $1000 kit thats 45hp proven... Stock 450's are mid 30's!

[kfxracer]

ok, so with a ct racing kit, pipe, and bigger carb, I could prolly hang with 450's???

[Jake250ex]

the ct kit comes with the pipe and carb.

and yeah, youll be as fast if not faster but only in a straight line. you can have all the motor you want but it wont get you far in a stock blaster chassis.

[kfxracer]

yeah, I can't believe that though, but the only drawback to the ct racing kit is that you have to run on race gas don't you?

[blaster99]

http://img.photobucket.com/albums/v703/blaster99/racebike07016.jpg

i want 6 grand for this bike

and i want 5,500 for this with wahtever frame color you want, we are re-doing the whole quad, bearings and all.
http://img.photobucket.com/albums/v703/blaster99/random002.jpg

i got 2nd in the youth class in nexengland, and both of thease are the fastest in newengland no doubt.

[blasterfreak99]

you an spend all the money you want but you are still gonna be dissapointed. look at my sig. my brother has an all stock 07 450r and in a straight line he always beats me by about 2-3 lengths. yes i can ride and he is even heavier than me. go out and get a 450r or a yfz if you want something light.

[blaster99]

well, im just sayin here.. i can win C class in newengloand on my blaster. i have a faster lap time than the leader.. who smokes the rest of the feild, and is going to A class next year. i could probibly get to 7 or 8 in B class, and in the pro class, nate morello, who runs nationals, ran only 9 secodns a lap faster than me.. with him on his crazy 450r and me on my blaster. blasters have the potentiol.(sp?)

[firefighterjosh]

#1 I am glad you understand that a KFX is a little big for you.

IMO if your going to be racing, and riding hard a blaster is not going ot cut it.

If you want to go that fast then your going ot have to buy a 450 or KFX400.

IMO buy a 300ex, learn to ride it fast, then once you get older get a 450;)

[kfxracer]

I can ride it no problem, but in the air and going through tight corners, it's a little big a heavy for me to throw around.

[pbblaster2]

factory 7 just put some kind of pre ported cylander on mine and a 30 mm carb and im killing z400s i also have a pipe and reeds

[blaster99]

Originally posted by pbblaster2
factory 7 just put some kind of pre ported cylander on mine and a 30 mm carb and im killing z400s i also have a pipe and reeds

the firebreather? or just the standard arisal. both of those haul ***.

[pbblaster2]

i dont rly know i looked at the intake port when we got it home and it is deffently opend up more and it is not the same as a stock cylander intake,but i knwo its not a firebreather because it is not p&p so im stumped

[pbblaster2]

i just looked it up i think it is the standerd 200 kit