flht_db
10-05-2007, 08:31 PM
Installing a Koso Intake and Keihin PE 20 carb on an eton 70.
Intake looks pretty straight forward, gasket, reed cage, then intake. The reed cage had a red blocker in it, switched it to the 24 as I read it was supposed to be the closet to the size of the carb. is there a gasket between the intake and the reed cage?
Carb I changed the jet (108), The brass fitting is the fuel connector correct? There is a vent line and a drain, they just hang, correct.
The motor will not start, When I give it throttle when trying to start it sound like it's popping in the cylinder almost like air.
Does anyone know if the carb is preset or do I have to set the air fuel.
Thanks-
dennis
Intake looks pretty straight forward, gasket, reed cage, then intake. The reed cage had a red blocker in it, switched it to the 24 as I read it was supposed to be the closet to the size of the carb. is there a gasket between the intake and the reed cage?
Carb I changed the jet (108), The brass fitting is the fuel connector correct? There is a vent line and a drain, they just hang, correct.
The motor will not start, When I give it throttle when trying to start it sound like it's popping in the cylinder almost like air.
Does anyone know if the carb is preset or do I have to set the air fuel.
Thanks-
dennis