to tall??

[motoX11-ktm.man]

hey,
1st: i came from germany, so my englisch is bad
i have a question:
i´m 1,87 m
am i to tall for this quad??
thanks

hy leute,
1.: ich komme von deutschland un daher ist mein englisch so schlecht.
ich bin 1,87m groß
und da wollte ich mal fragen , ob ich zu groß für dieses quad bin??
vielen dank

[cdrookie]

my conversion might be a little off but you should be good. the 250r seems to fit just about everyone, large or small. i'm 6'2" and it fits me fine.

[86 Quad R]

yup it'll fit ya fine. i'm about the same height as yourself. ya may need to adjust the handle bars a bit but otherwise your ok

[motoX11-ktm.man]

oh, then you are just 1,55m !( if you are
i think i´m 72 "!

[motoX11-ktm.man]

oh,i was too late with my answer...
thanks 86 quad r,
but do you mean,that you have the same high,then i?
and do you think that that high is fine for a 250ccm quad or a 450ccm quad?
but thanks

[86 Quad R]

yes. i'm also around 1.87m, 187cm, 18.7dm, .0187hm, 1870mm or 6.1' and at 180lbs and my quad has no problem powering me around. :)

[motoX11-ktm.man]

yes,that what i want to know!
super!
have you the normal frame, or a special?(like 1 from briel)
thanks

[86 Quad R]

mines stock '86 with 88-89 swinger and the 88-89 rear suspension.

[motoX11-ktm.man]

what do you mean with
mines stock??
it does mean,gruben vorrad???????
i don´t konw what you mean

[86 Quad R]

meaning it is a "HONDA" factory frame.

[motoX11-ktm.man]

oh,thanks,
but a frame you can have from the beginning?not a frame, which was tuned by honda?

[atvmxr]

Im 6'-10" = 82" = 2.08m either move the bars foward or get a longer steering stem




:macho

[Cr85rRida]

Originally posted by motoX11-ktm.man
oh,thanks,
but a frame you can have from the beginning?not a frame, which was tuned by honda?


Yes, a frame from the beginning.

[motoX11-ktm.man]

thanks a lot