View Full Version : What Else For My 300????
Twiztid
11-02-2002, 03:00 PM
what other mods could i do to my 300? everything i have done so far is below. i also do have a kand n airfilter, it's not on there yet though.
KP's lil'300
11-02-2002, 03:09 PM
ill go ahead and tell you that you should get a pic of it, but you could cut your plastics and go through and polish all of the little stuff (throttle cover, etc), and works shocks and a-arms. KP
GT300
11-02-2002, 03:27 PM
Depends on what you are looking for. Performance or chassis. For performance you could get a drop in cam, weisco piston, porting, and a bigger carburator. For the chassis there are a-arms, axle, and a steering stabilizer. Thats all I can think of for now.
exriderdude
11-02-2002, 03:57 PM
shocks, piston, cam , and graphics;)
or everything i have:devil
ll
ll
ll
V
Twiztid
11-02-2002, 03:57 PM
where can i buy a drop in cam, and how much would it be? and what would the cam do to it, like perfomence wise?
GT300
11-02-2002, 04:13 PM
Web cam makes a drop in cam for around 110. Perfomance wise it makes the lift and duration a little bit higher. Meaning that more air and fuel can get into the combustion chamber and more exhaust can get out, giving more power.
Sportrax10
11-02-2002, 04:19 PM
i would suggest getting a PRM swingarm skip plate instead on the DG...... i have heard a lot of goos things about the prm and not the greatest about the DG.......... but its your choice :)
how bout some elka shocks? :cool:
Twiztid
11-02-2002, 06:19 PM
where can i buy one of those skidplates? and how much are they?
and how much would elkas cost, iv'e always heard that they are really expensive, where can i buy those too?
GT300
11-03-2002, 03:57 PM
You can buy one at www.prm-atv.com It is about $90. Quadshop told me that Elka dual rates without rezzies are $470 and about another 100-150 for rezzies. It is pretty expensive considering that you could get a set of works dual rates with rezzies for the same price as elkas without rezzies.
Twiztid
11-03-2002, 04:02 PM
thanks ya'll be alot of help!
GT300
11-03-2002, 04:50 PM
Happy quaddin.:)
Ride400
11-03-2002, 04:59 PM
350X motor
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.