PDA

View Full Version : YFZ Engine Problem



racer113
09-30-2007, 12:20 PM
let me know if you guys have seen this before

when revving high I blow out the valve cover gasket

I have changed out the filter, blew air through the lines both directions and cleared out some debree

I do not run the oil overflow box, but I am running K&N filters in its place for the 2 oil vent lines.

my next step is just to try cleaning it again if any one else has a suggestion it would help

MJNOVA
09-30-2007, 06:17 PM
Run the overflow bottle.. It come in AND goes out which your setup doesn't... Many causes. Crankcase pressure...

imsam77
10-04-2007, 06:26 AM
not to be an ***, but did you torque the bolts to the right specs?

racer113
10-04-2007, 07:40 PM
never rebuilt, brand new from Yamaha less than 1 hour, no warranty though straight from factory

racer113
10-11-2007, 06:20 PM
ya looking around at the motor I found out I was stupid

was going to put on the 2 new oil breathers and only could fine 1 hose and found out I never took off the main case plug

So threw on the breather there and runs great

imsam77
10-11-2007, 10:14 PM
well, at least now you know you're stupid...**** you have any idea how many poeple at walking around in the world not even realizing how studpid they are...sheesh =) glad you got it fixed bud, safe riding.

Dr89
10-28-2007, 09:58 PM
lmao...haha ^^^^ i think i just got a good idea of who one of those people might be...?