PDA

View Full Version : Clutch Problems



beaker1214
09-28-2007, 10:27 AM
So I replaced my clutch plates about 4 months ago and now when ever I start up the 416 cold ( with the clutch lever pulled in) and put it in gear it jumps forward sometimes like the clutch is disengaged completely. Any ideas on why this is? It does seem like after it warms up and I ride it for a while its not as bad but im no expert by any means and really don't know what is causing this.

GOTFEAR
09-28-2007, 03:31 PM
if its hard to get in neutral your clutch is out of adjustment check your clutch cable on the top off your cover make sure you have a little play in the cable by moving the clutch arm and make sure you have some play between the handle and clutch perch

dariusld
09-28-2007, 04:03 PM
This is one of the signs of grooves in the clutch basket. Did you check that when you replaced the clutch?