PDA

View Full Version : 400ex Width



Rip_Tear
11-01-2002, 06:40 PM
What is the real stock width? I know its late, but is it really over 4'? I should be able to fit one in my trailer, I have put other quads in there... I better not have any problems please post if you know the exact stock width, THanks:D

400exBro
11-01-2002, 06:44 PM
look it up in hondas web page, but i think it is less than 50" but i think more than 44, to give you a rough figure...

good luck tommorrow by the way, if you don't buy it you can always get mine!!!

lata
Bro

Taco
11-01-2002, 06:47 PM
i believe the rear is approximately 46inches

Rip_Tear
11-01-2002, 07:04 PM
Thanks! I know the front is supposed to be 48.4" I just wanted to check. If worst comes to worst I can always take the front tires off..... Should be fine though! I don't think I will be able to sleep all night! Just too darn excited!

Rider#11
11-01-2002, 08:25 PM
the front is not 48..lol....to wide thats with +2 a arms...THE WIDTH IS 46.3

CEET400ex
11-01-2002, 08:40 PM
I have a 2+2 Axle and wider holeshots and my rear end is exactly 48 inches wide

11-01-2002, 08:43 PM
YOU ARE ALL WRONG ! IT'S Width 45.3 inches ON THE HONDA WEBSITE!!!!

11-01-2002, 08:44 PM
click this http://www.hondamotorcycles.com/atvs/sport/model.asp?ModelName=Sportrax+400EX&ModelYear=2003&ModelId=TRX400EX3 and click on specifications and youll see Length 72.2 inches
Length 72.2 inches

Width 45.3 inches
Height 43.7 inches
Wheelbase 48.4 inches
Seat Height 31.9 inches
Ground Clearance 4.3 inches
Turning Radius 10.5 feet
Dry Weight 375.0 pounds
Fuel Capacity 2.6 gallons, including 0.4-gallon reserve

and etc..

11-01-2002, 09:26 PM
thew rear is wider , its about 45. somin or 46 the front is 44 or 45 its narrower than the rear

11-01-2002, 09:37 PM
Yea listen to him he is a FRICKIN GENIUS seriously lol. But yea he is right. hey bill how wide is ur's gonna be all together in front?

11-01-2002, 09:41 PM
i measured mine and it was like 44 somin or 45 in the front and the back with the lsr axle is about 49, my front will be 50 when i get the a arms

11-01-2002, 09:46 PM
so like +3 arms right.. does a rpm dominator axle extend any farther than 4 inches?? I heard those are strong as axles and garunteed too. Think I need wider axle or just offset rims or w/e