View Full Version : direct shifter?
DMIRacing
09-24-2007, 01:25 PM
Does any one know if a company makes a direct shifter for the Warrior, that link system kind of sucks when you try to shift gears in a racing situation. thanks
97WarriorRider
09-26-2007, 06:10 PM
check www.yfm350central.com they will have lots of information that you need
gotwarrior
10-01-2007, 07:16 PM
I when i had my warrior.. I took a 400ex shifter and add some heat to it and bent it to make it fit.. it worked great.. just something you may want to thing about..
DMIRacing
10-03-2007, 06:45 AM
I went on to yfm350central.com and found that they said a yz250 and yz250f, blaster and yfz450 shifter all work. Most of them seem to use the yz250(99-07) shifter. thanks for the help.
54warrior
10-04-2007, 11:47 AM
Just modify the stocker.
Cut it, weld it, heat it up and bend it.
http://i154.photobucket.com/albums/s245/54warrior/Quad/S6300393Large.jpg
http://i154.photobucket.com/albums/s245/54warrior/Quad/S6300392Large.jpg
Ogener
10-04-2007, 03:29 PM
I'm using a yz250 shifter and I think I ordered it for a 2000 yz. It works great, I'll never go back to that linkage.
JonBsbB
04-27-2012, 10:30 PM
I know im bringing this thread back from the dead but, when any of you used a yz250 shifter did you have to modify it any?
beastlywarrior
04-28-2012, 09:04 AM
Nope yz250 bolted right on
Ba9801
08-02-2012, 11:17 PM
I had to modify mine but I have an 87 with a pull starter so I had to bend mine a bit to give the added clearance needed/
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.