PDA

View Full Version : 400ex hybrid to 450r motor....



YOGILUNA
09-24-2007, 12:36 PM
im putting a 450r motor on my 400ex frame but does anybody know where to get custom made motor mounts for the 400ex frame to the 450r motor......please help.....

250rmike
09-24-2007, 02:57 PM
you will probably have to make them unless your talking about a crf motor then a aftermarket frame builder should be able to make them for you

red426ex
09-26-2007, 07:17 PM
i have a 450R motor in my flat tracker and tried to find motor mounts diddnt have any luck but im a welder so i just took a few nights and made my own out of some stainless we had laying around at work... dont know how strong you will be able to make evrything for racing motocross due to not much room for stuff but for flat track works just fine...

250rmike
09-26-2007, 07:29 PM
as long as you can get the rear motor mount through the swingarm and get the motor in there straight you should be able to make motor mounts that work. flattrack or mx shouldnt matter if you use some good solid mounts. there shouldnt be shock that will move the motor