PDA

View Full Version : hot start ?


phat1478
09-15-2007, 06:03 PM
is it nesicary to remove/plug the hot start from the 450 carb for clearance or can i just leave it and tie the cable up
gcart2
09-15-2007, 06:11 PM
ought to get a 450 cluth lever and install it
JOEX
09-15-2007, 07:14 PM
The answer might be in this thread...

http://www.exriders.com/vbb/showthread.php?s=&threadid=143853
zrpilot
09-15-2007, 07:44 PM
Originally posted by phat1478
is it nesicary to remove/plug the hot start from the 450 carb for clearance or can i just leave it and tie the cable up here is what I did

My 450R carb install (http://www.exriders.com/vbb/showthread.php?s=&threadid=314423)
phat1478
09-16-2007, 07:20 PM
Originally posted by gcart2
ought to get a 450 cluth lever and install it

what for?
gcart2
09-17-2007, 12:58 PM
hot start willl not work on the 400? p;z sont bash me if this is dumb question.
GPracer2500
09-17-2007, 03:50 PM
Originally posted by gcart2
hot start willl not work on the 400? p;z sont bash me if this is dumb question.

A hot start mechanism could be made to operate on a 400EX.

BUT, there's really no reason to add that feature. For the most part, hot start mechanisms are only utilized on kick starting engines. Some electric start engines have hot starts but every one I can think of off the top of my head also has a kick start.

It's not that it couldn't be done. There just isn't a compelling reason to do it.