QuadJunkies
09-15-2007, 11:31 AM
After seeing how poorly Brandons motor ran after the last WORCS round, we decided a full tear down was in order.
The jetting was waaayyy higher than it should have been ,and we was worried about an air leak somewhere in the seals,and it was burning up a piston every ride.
So with that said, Greg from Fuel Technologies and a new player Rich Clark from Utah teamed up and are getting involved with the high performance with the DRR and we are very excited to be a part of it !! :)
So we are starting with a new crank and checking all the port timing ect.... With all there help, we hope that this will help Brandon stay on top and not have to work quite as hard to play catch up .Hopefully this time around, all areas will have been assessed and any bugs in the motor will be no longer there.
We feel the 2008 season will be a greally good year for Brandon in the WORCS series, so wree goign to start early in getting that boy running HARD!!
This is an FTR crank .Its the 90 crank.
Isnt that puuurrrdy... :devil:
Fuel Technologies (http://www.fueltechusa.com/)
http://www.pbase.com/quadjunkies/image/85618905.jpg
The jetting was waaayyy higher than it should have been ,and we was worried about an air leak somewhere in the seals,and it was burning up a piston every ride.
So with that said, Greg from Fuel Technologies and a new player Rich Clark from Utah teamed up and are getting involved with the high performance with the DRR and we are very excited to be a part of it !! :)
So we are starting with a new crank and checking all the port timing ect.... With all there help, we hope that this will help Brandon stay on top and not have to work quite as hard to play catch up .Hopefully this time around, all areas will have been assessed and any bugs in the motor will be no longer there.
We feel the 2008 season will be a greally good year for Brandon in the WORCS series, so wree goign to start early in getting that boy running HARD!!
This is an FTR crank .Its the 90 crank.
Isnt that puuurrrdy... :devil:
Fuel Technologies (http://www.fueltechusa.com/)
http://www.pbase.com/quadjunkies/image/85618905.jpg