is this crank case fixable?

[400ex429]

Alright i have both crank cases for a blaster that I bought and now parting out, only problem with the crank cases is ones side a piece chipped out
http://memimage.cardomain.net/member_images/4/web/2224000-2224999/2224437_39_full.jpg

http://memimage.cardomain.net/member_images/4/web/2224000-2224999/2224437_40_full.jpg

im no expert but ive talk to a few people and it looks fixable if someone was to grind it smooth and weld a piece back in...the reason i say that is because as you can see in the second picture there are other u shaped cutouts. so if i grind it down and weld a piece back in there then grind/cut the same size u shape again it should be good to use right?

also,
http://memimage.cardomain.net/member_images/4/web/2224000-2224999/2224437_41_full.jpg
if it is fixable, how much would all of the crank case pieces sell for together as is....and how much would they be if i fixed it.

[honda450rider33]

i would say it is fixable like you said i would grind it smooth then weld a peice in then being there is no oil in there it is the stator side i would get is as smooth as possible so the gasket surface is smooth and i think you will be fine. that is not really a real gasket it is like a rubber gasket and it will bend a little just make sure you get it as close as possible

[400ex429]

any idea on what kind of price I can get for these cases

[honda450rider33]

i would make a guess at 100-150 maybe a little more go on ebay and see what they are going for