450R Aftermarket Parts 06 & Newer.

[Lonestar_R]

I have a bunch of aftermarket parts that fit an 06 & newer 450R. The reason I am selling is because I am selling my 450R and I already bought an LTR. So these must go! I have a few more than what I will list in the next couple days.


Rossier Full Exhaust: SOLD

[Lonestar_R]

Derisi XC Revaled Front and Rear Shocks with Derisi Rear Link. Valved for 225 Very agressive trail rider.

Fronts: SOLD

[Lonestar_R]

Rear & Link SOLD

[Lonestar_R]

LSR Anti Fade Nut: 100 shipped Sale Pending

[Lonestar_R]

Tag T2 Bars, CR Hi Bend with Spider Grips: 55 Shipped

Shown with Trail Tech Clamp: SOLD

[Lonestar_R]

Clamp & Bars again

How many rides on the shocks?
Will you sell the rear shock and link seperate? If so, how much?

[Lonestar_R]

OMI Greaseable Steering Stem Bushing: SOLD

[Lonestar_R]

Noss Machine Case Saver: 25 shipped

[Lonestar_R]

Hiper Fronts, Honda Suzuki Bolt Pattern 3+2 offset, Tires not included: 275 shipped

[Lonestar_R]

Hipers again

How many rides on the shocks?
Will you sell the rear shock and link seperate? If so, how much?

also, will they work on a 05?

[Lonestar_R]

they will work on an 05 if you use the 06 swinger and dogbone I believe

[duke416ex]

pmed ya

[Colby@C&DRacing]

I will take the OMI stem bushing

[xsr_racing28c]

pm me your address, i'll take the lsr anti fade...

Thanks, Jay

you're pm'ed.

[cthomps07]

bump for ya

[Lonestar_R]

Must Sell.....Make offers

[One_Bad_400]

how much higher do those bars sit than stock when on a stock stem?

[Lonestar_R]

Actually they are not higher...they are just about the same height with that clamp. But the bend is much more comfortable bend than the stock bend. I am about 6'1" and the stock bars feel way too cramped. hope that helps you out. I have a buddy that has a pic of his stock bars on his 06 and my 06 with these bars and clamp. If I can get ahold of him I'll see if he can send you a pic of them together.

here is the pic from front ...lonestars bars are on the left bike in this pic:
http://img.villagephotos.com/p/2004-12/921056/WXKRP-derisifront2.JPG

and one from the back...his bike is on the right of course:
http://img.villagephotos.com/p/2004-12/921056/PBJCP-derisirear.JPG

[Ginxd00]

Brock,
Emailed you back about the shocks also.

[Lonestar_R]

Thanks Speedy those were the ones I was wanting.

Ginxd00 replied back

pm'ed

all over it bud...i knew that is what you wanted...ya know, i charge a fee for that:D

[Lonestar_R]

Yeah ok...I'll pay you the second tuesday of next week for it

good, that is right around the corner...since my week never ends...

[nissin 93]

how much for the front shocks and hipers please

[Lonestar_R]

Nissin 93: Front shocks and Hipers: $540 shipped

[Lonestar_R]

bump

[250Renvy]

Do you know if the bars and clamp will fit a 250R? If you don't know could you measure the span between the bolts.

Thanks

[Lonestar_R]

I believe they should fit a 250R since this is actually a clamp for a 400EX. I ordered the 400EX part number to get the cover with the 3 holes for the temp, and neutral light, and the key. And if I remember right the 400EX and 250R stems are the same except for the bottoms. Am I correct? Let me know if you still need me to measure them

[Lonestar_R]

Few things left and they gotta go!!!!!

[HingeDisc07]

Is the clamp for 1 1/8 bars? And do you take Paypal?

[Lonestar_R]

Yes it is for 1 1/8 bars and yes I do take paypal as long as you add the 3%

[250Renvy]

Hey, sorry to be a pain and it's probably more effort than it's worth but if they'll fit, I'll take them.

Could I get a pic of them with the top clamp off and the bottom as well as a measurment of the span between the bolts on the bottom.

I think they will work with stock bars but I'm trying to figure out if they will work with my antivibe bars.

Thanks.

[Lonestar_R]

What antivibe bars are you talking about? Flexx Bars? If your trying to use an antivibe stem this won't work for you. If your using flexx bars on a stock stem this will probably work just fine. I believe all honda's are the same as far as the width of the clamps or bolts on the stem.

[HingeDisc07]

Hey whats your PayPal email address? so the total would be $61.80. I can pay immediatly. thanks

[HingeDisc07]

payment has been sent for clamps! THANKS :D :D

[Lonestar_R]

I'll ship tomorrow. thanks again