PDA

View Full Version : Help



racinlifeaway33
09-09-2007, 06:26 PM
I just got my 05 450R.... Has a TC nationl head, 13.5 or 13:1 piston and today first ride.. It blew either anti freeze or oil ALL over the place.. All over my boot, clutch cover, kicker, bottom of the front fender... NO WHERE else... what could this be... i did look at the level of the oil they were both normal. The level of the anti freeze in the rezz... was LOW which leads me to believe its anti freeze. However again what could or would cause this to be happening???? Anyone, any ideas???

4ABURN
09-09-2007, 06:31 PM
have to know weather its oil or anti freeze first or we really can't help.(I don't think).It could be either.Sorry let us know:confused: :confused:

racinlifeaway33
09-09-2007, 06:34 PM
almost positive its anti freeze... but could you list something for either.. like just to see if it makes sence for one or the other??? sorry

4ABURN
09-09-2007, 06:43 PM
some times if a hose gets a small hole it will only leak when the engine is hot,and builts pressure. cheack around clamps (some times peaple tighten them to much and tair them.)is you fan coming on.

4ABURN
09-09-2007, 06:45 PM
and aways cheack your rad cap make sure its clean and tight.:D

WOLFPACK
09-09-2007, 08:04 PM
Did Tom Carlson build the motor or just the head?

racinlifeaway33
09-10-2007, 07:35 AM
I will have to check the tubes.. That is possible and i will def look. As for the cap def clean and def tight. First thing i looked at when i noticed it. He just built the head. I believe and that kevin from LCC put the motor together. Any other ideas????