XxxTRiPxxX
09-07-2007, 11:42 AM
i have the following for sale:
long travel 2+ jrd a arms $500
long travel swingarm extened 1 1/4" $600
axis shocks rebound and compound adjustable with remote ressies 19.25" long valved for a 195# a class rider $800
axis rear shock rebound and compression adjsutable 17.75" long valved for a 195# a class rider $600
team industries firestick axle +3" $300 (this includes team industries axle hubs)
team industries tapered bearing carrier $200
lonestar anti fade hub $150
douglas rims witha 4:1 offset with maxxis mx razors mounted $200
all parts except the a arms, swingarm have less then 20 hours ride time on them the a arms & swing arm were bought used off of a fellow exrider's bike and were in fairly new condition, they have the normal wear and chipped powder coat. heim joints are still good no slop and broken in well. i must say that this rear end really impressed me. it is very simular to the walsh savior rear end with the linkage set up. it is in ur best intrested to buy the rear shock and swingarm together. the rear shock is a custom length made for this swingarm and may not be compatable with other swingers. rear swing arm could also be used with the stock shock and linkage setup. the front rims and tires have less then 3 hours of ride time on them. i dont have detailed pics of the parts at this moment.but if u would like i could send a photo of my completed bike before i stripped the parts
long travel 2+ jrd a arms $500
long travel swingarm extened 1 1/4" $600
axis shocks rebound and compound adjustable with remote ressies 19.25" long valved for a 195# a class rider $800
axis rear shock rebound and compression adjsutable 17.75" long valved for a 195# a class rider $600
team industries firestick axle +3" $300 (this includes team industries axle hubs)
team industries tapered bearing carrier $200
lonestar anti fade hub $150
douglas rims witha 4:1 offset with maxxis mx razors mounted $200
all parts except the a arms, swingarm have less then 20 hours ride time on them the a arms & swing arm were bought used off of a fellow exrider's bike and were in fairly new condition, they have the normal wear and chipped powder coat. heim joints are still good no slop and broken in well. i must say that this rear end really impressed me. it is very simular to the walsh savior rear end with the linkage set up. it is in ur best intrested to buy the rear shock and swingarm together. the rear shock is a custom length made for this swingarm and may not be compatable with other swingers. rear swing arm could also be used with the stock shock and linkage setup. the front rims and tires have less then 3 hours of ride time on them. i dont have detailed pics of the parts at this moment.but if u would like i could send a photo of my completed bike before i stripped the parts