danhung11
09-06-2007, 09:27 PM
I am cleaning out my garage of all these parts that I have accumulated over the past years. Most of the parts are in great shape. Let me know if you want me to email you bigger pics. All these PRICES INCLUDE SHIPPED to 48 States ONLY. I will take PayPal and Money Orders only.
If you thnk my prices are high, then MAKE ME AN OFFER. Make combo offers to move this stuff!
Thanks for looking. If you have any questions, I can be reached at (816)304-8832.
Dan
TRX250R Parts:
- RAD Tapered Bearing Carrier - $85 shipped
- CT Pro X 310 Head and Water Neck (make offer)
- Freshly Coated Spindles 86-87 (Black) $50 shipped
- Polished Stator Cover $50 shipped
- Front Master Cyllinders $25 each or $40 for both shipped - the one that is polished is in good shape except the window cracked and I replaced it with dimes/superglue. It worked for a while until it started a slow leak. You can replace the window, but I just bought a new one.
- Rear Polished Master Cylinder - $65 shipped
- Stock Radiator Hoses to radiator only - $25 shipped
- Stock Radiator - GREAT SHAPE! $60 shipped
- Used throttle/clutch cables - $25 shipped for all of them - throttle cable has 3 adjustment plus the one on your carb
- Used OEM Reed Cages and Intake Boot - $15 shipped each or $35 for all
- Seat Latch and Brake Lever - $20 shipped - I have the piece to seat latch as well.
- Stock Tank w/ White Maier Tank Cover - $55 shipped I will sell the entire set of plastics for $325 shipped. This is a custom graphics kit from Don at Pro Graphics - he has the design on file if you want to change to your color scheme for $100 buck. This initial set cost me $180 due set up fees. They are nice and look great in person as you can tell from the pics. The only thing wrong is the usual pipe burn - it is how I bought them, cannot notice really. I run a centermount and it clears easily.
- V-Force 2 Reeds - $25 shipped - I have replacement reeds. A couple of the screws are stripped and need to be taken out and replaced. This can be easily done.
- Stem Clamp - $15 shipped
TRX400EX Parts:
- Cables and Motion-Pro Twist Throttle with new Scott Grip $50 shipped - They are in great shape. I think one cable is the clutch and the other is for the throttle.
TRX450R Parts:
- Parking Brake Stuff - $20 shipped
- Stock Chain - $20 shipped - one link has been removed and replaced with a master link.
Miscellaneous:
- Grooved Radials on Douglas Rims - $90 shipped
- 8" Rear Douglas Black Label Rims - $40 shipped - the one on the right has a dent and has a slow leak (lasts 3-4 days)
If you thnk my prices are high, then MAKE ME AN OFFER. Make combo offers to move this stuff!
Thanks for looking. If you have any questions, I can be reached at (816)304-8832.
Dan
TRX250R Parts:
- RAD Tapered Bearing Carrier - $85 shipped
- CT Pro X 310 Head and Water Neck (make offer)
- Freshly Coated Spindles 86-87 (Black) $50 shipped
- Polished Stator Cover $50 shipped
- Front Master Cyllinders $25 each or $40 for both shipped - the one that is polished is in good shape except the window cracked and I replaced it with dimes/superglue. It worked for a while until it started a slow leak. You can replace the window, but I just bought a new one.
- Rear Polished Master Cylinder - $65 shipped
- Stock Radiator Hoses to radiator only - $25 shipped
- Stock Radiator - GREAT SHAPE! $60 shipped
- Used throttle/clutch cables - $25 shipped for all of them - throttle cable has 3 adjustment plus the one on your carb
- Used OEM Reed Cages and Intake Boot - $15 shipped each or $35 for all
- Seat Latch and Brake Lever - $20 shipped - I have the piece to seat latch as well.
- Stock Tank w/ White Maier Tank Cover - $55 shipped I will sell the entire set of plastics for $325 shipped. This is a custom graphics kit from Don at Pro Graphics - he has the design on file if you want to change to your color scheme for $100 buck. This initial set cost me $180 due set up fees. They are nice and look great in person as you can tell from the pics. The only thing wrong is the usual pipe burn - it is how I bought them, cannot notice really. I run a centermount and it clears easily.
- V-Force 2 Reeds - $25 shipped - I have replacement reeds. A couple of the screws are stripped and need to be taken out and replaced. This can be easily done.
- Stem Clamp - $15 shipped
TRX400EX Parts:
- Cables and Motion-Pro Twist Throttle with new Scott Grip $50 shipped - They are in great shape. I think one cable is the clutch and the other is for the throttle.
TRX450R Parts:
- Parking Brake Stuff - $20 shipped
- Stock Chain - $20 shipped - one link has been removed and replaced with a master link.
Miscellaneous:
- Grooved Radials on Douglas Rims - $90 shipped
- 8" Rear Douglas Black Label Rims - $40 shipped - the one on the right has a dent and has a slow leak (lasts 3-4 days)