PDA

View Full Version : i need help



boomer43
09-06-2007, 12:28 PM
I cant figure out why my clutch is slippen. can some one help me. I took the cover of why it was runing and the front variator was working. could the rear spring be wore out, it is a black coso 1500 rpm.Its a apex 70cc

racinmason911
09-06-2007, 02:54 PM
Is the belt spinning while it's running? If so than you've got some broken tranny gears to replace.

boomer43
09-06-2007, 04:36 PM
yes it is at a idle

woodsracer22
09-06-2007, 05:04 PM
With the cover off grab the rear clutch bell and try to turn it should move the rear wheels. If it does gears should be good. Next I would check the 3 shoe clutch and bell if the bell is discolored thats more than likely whats wrong. The stock FRC clutches do not last long. If the belt is slipping there should be alot of black dust.

boomer43
09-06-2007, 07:26 PM
thanks for the help,one of the gear was strip

ecmini1
09-07-2007, 08:36 PM
Before you break another trans need to beef it up. With a bushing and trans saver kit.

jetmedic
09-08-2007, 09:10 AM
listen to ecmini. worth it definetely

boomer43
09-09-2007, 01:30 AM
i have the bushing and trans saver