PDA

View Full Version : 400ex: Can not get the jug off ...


shaneb
10-29-2002, 05:05 PM
head came right off jug will not budge


I removed the 5 bolts and the 2 8m bolts.

But the jug will not come off ......

Any ideas ????

thanks
methyman
10-29-2002, 05:09 PM
Tap gently with a rubber mallet front and back and cylinder should come loose.:D
phatswinn
10-29-2002, 05:09 PM
why are you goin in there? if you seized the engine that would be why or the gaskets just on there real good? thats all i can think of
shaneb
10-29-2002, 05:37 PM
I am looking for by dead blow .....


Why: to install a 440 kit !!!!

Shane
JabberJaw
10-29-2002, 05:58 PM
Can not get the jug off ...
head came right off jug will not budge

Maybe if you asked her politely...she would lift her jug so you can pull your head out!
shaneb
10-29-2002, 06:01 PM
that might work but I would rather use a hammer !!!

Shane
ridered86
10-29-2002, 06:01 PM
Originally posted by JabberJaw


Maybe if you asked her politely...she would lift her jug so you can pull your head out!

i havent been to exriders in a week, glad to see nothins changed:rolleyes:
lmao
shaneb
10-29-2002, 06:14 PM
ok a piece of wood and a 2 pound **** was more than she could bear.

Off to the machine shop to get the 440 kit installed ....

Thanks for **most** of the help I got :)