PDA

View Full Version : New engine


clutch22
09-01-2007, 02:40 PM
Well i finally got my engine back from being rebuilt, and with a 310pv ... put my quad back together this morning, and now i'm breaking it in... the suspense is terrible.. haha
redrooster310r
09-02-2007, 05:32 AM
310 's rip. i had one for years.
C-LEIGH RACING
09-02-2007, 09:11 AM
Originally posted by clutch22
Well i finally got my engine back from being rebuilt, and with a 310pv ... put my quad back together this morning, and now i'm breaking it in... the suspense is terrible.. haha


Take your time & do it right & it will last you awhile.
Neil
clutch22
09-02-2007, 01:27 PM
hmm... after riding it today, it seems to be leaking fuel around the base gaskets.
Rollscanardly
09-02-2007, 01:36 PM
im no expert but thats probably coolant, not fuel
clutch22
09-02-2007, 02:24 PM
nahh... its fuel
clutch22
09-02-2007, 02:59 PM
Originally posted by clutch22
nahh... its fuel

Sorry, my mistake.. i took a closer look this time and it is coolant
clutch22
09-02-2007, 08:05 PM
anyone else ever had this happen?
C-LEIGH RACING
09-03-2007, 08:30 AM
Have you checked on both sides of the cylinder to make sure its not comming from the head area & running down.

Unless there was a small hole somewhere in the casting, only place coolant could come from on the cylinder would be from the two allen screws in the base of the cylinder casting.

Those two allen screws are in the base up under the exhaust port so if by chance someone wanted to use the Pro-x cylinder on a CR250R dirt bike.
Neil