Wanted 300ex race ready

[mamaknothead]

We are looking for a national full race ready 300ex . I would like it to be no older than a 2005 to 2007. If anyone running the national circuit is looking to sell there race quad (300ex)after the season has ended please email me at rseller@entergy.com Thanks

[300ex_#387]

I never did race it at nationals, but is is national legal. I did race it at a few arenacross races with some national riders. Not sure if its what your interested in, but it is an 03.

[300ex_#387]

I do have a thread in the Honda for sale section.

[mamaknothead]

Who built the engine and does it have the big valves?.

What is the rear shock?

What is the front end and front shocks?

What is the swing arm and axle?

Is the frame gusseted?

What is the pipe?

Is the carb a 400ex or what carb is it?

What kind of time is on the engine?

Sterring stem?

CDI/ rev box?

Is the engine stroked or bored to get to 297?

Call me 281-435-7031 ask for Dick. I will be up pretty late

[300ex_#387]

Originally posted by mamaknothead
Who built the engine and does it have the big valves?.
Travco Motorsports built it in march. I had the valves replaced, but no they arent oversized

What is the rear shock? 660 raptor

What is the front end and front shocks?PRP 400ex +3 Long Travel a arms New balljoints tie rods and a arm bushings. And the shocks are PEPs 400ex standard travel.

What is the swing arm and axle?
Lonestar +2 swingarm, and a Lonestar +4 axle

Is the frame gusseted?
Yes and powdercoated

What is the pipe?
Scorpion..if you are going to run nationals I would replae it it a sparks.

Is the carb a 400ex or what carb is it?
400ex carb

What kind of time is on the engine?
Not a whole lot It was built in march and raced prolly 8 time with hardly any practice.

Sterring stem?
Brand new Bugard +2

CDI/ rev box?
Travco Motorsports raised the rev limit 1000 more than stock.

Is the engine stroked or bored to get to 297?
It is bored to a 297

Call me 281-435-7031 ask for Dick. I will be up pretty late

The reason why my price is so low is because the exhaust isnt in the greatest shape, and I would replace it witha sparks, and the plastic has a hole where my pipe melted through. There is a crack in the case where I threw a chain when my masterlink came apart, but there is no oil leak, and I have talked to the guy that built our motor and he said it wont effect a thing where its cracked.