PDA

View Full Version : preddy won't fire



ride red 14
08-28-2007, 02:23 PM
i have a 04 troy lee preddy. it will crank but no fire to the plug. has any one else had this problem? any help where to start would be great.

the Z Man
08-28-2007, 02:58 PM
Check your coil wire, kill switch, plug. Does it have an aftermarket kill switch?
Check spark to all and trace it back..

ride red 14
08-28-2007, 03:53 PM
i dont even have any fire to the coil

Bradracer18
08-28-2007, 10:04 PM
There is a little black "bag"....near your ....leg area, on the clutch lever side. Find it and check to see if there is power on both sides of that. Its a small, circuit breaker type thing in there.


Check to see if there is power on the battery, and on the other side of the coil first. Check grounds too.

ride red 14
08-30-2007, 03:10 PM
has anyone had there start/stop switch (on the left bar) go bad. i can unplug it and jump the hot wire to the wire going to selenoid and it will crank, still no fire to plug though. i wonder if the switch could be bad not letting fire get to everywhere it needs to be. thanks for any help.

OutlawBill
08-30-2007, 03:39 PM
Check all brown and black wires for shorts if the insulation rubs off it will kill the engine.

ride red 14
08-30-2007, 06:39 PM
all of that stuff is good i think its the kill switch but im not sure

ride red 14
08-30-2007, 06:39 PM
all of that stuff is good i think its the kill switch but im not sure

ride red 14
08-30-2007, 06:40 PM
all of that stuff is good i think its the kill switch but im not sure

ride red 14
08-30-2007, 06:40 PM
all of that stuff is good i think its the kill switch but im not sure