robyone
08-26-2007, 07:48 AM
Up for grabs....PC 2000 275 power valve, cylinder needs to be re niked and you will need a new piston.
The bore is currently 69.5, I removed the cylinder because of a blown base gasket (cheap ebay gasket) and found the worn nikasil and a pinched ring.
There was no damage to the cylinder so you could just have it cleaned up and reniked, no need to have it bored.
Comes with required longer base studs and race or pump gas domes, looking for 500.00.... LMK
http://i4.photobucket.com/albums/y142/robyone/powervalve.jpg
The bore is currently 69.5, I removed the cylinder because of a blown base gasket (cheap ebay gasket) and found the worn nikasil and a pinched ring.
There was no damage to the cylinder so you could just have it cleaned up and reniked, no need to have it bored.
Comes with required longer base studs and race or pump gas domes, looking for 500.00.... LMK
http://i4.photobucket.com/albums/y142/robyone/powervalve.jpg