Benjithx
08-24-2007, 08:20 PM
So we have been building this project bike for the new company/website and I am a little concerned with how hot it gets.
I bought the bike used and It has always ran fine, but I have just always been worried about the heat.
It is a 04 with an ESR 480 kit at 12.5:1 compression and it is running a HRC cam.
I thought it might be running lean so I put the airbox lid on it to see if it would like that more, but it would break up at high rpm.
It has a Rossier Exhaust on it that glows red just next to the head after idling for a couple minutes.
Any suggestions or comments?
I bought the bike used and It has always ran fine, but I have just always been worried about the heat.
It is a 04 with an ESR 480 kit at 12.5:1 compression and it is running a HRC cam.
I thought it might be running lean so I put the airbox lid on it to see if it would like that more, but it would break up at high rpm.
It has a Rossier Exhaust on it that glows red just next to the head after idling for a couple minutes.
Any suggestions or comments?