anything mount straight up?

[dirtbike&quad]

any suspension that mounts straight up to the 300ex? other than like works, elka etc etc...

[honda300EXtreme]

you'll have to excuss my ignorance,, but what is it you are asking exactly?

[dirtbike&quad]

lol like do 400ex front shocks mount onto stock 300ex aarms? like 450r mount to 400ex with little to no mod. so do the 400 mount onto the 300?

[Ghost-Rider]

Why don't you just buy 300EX shock? I have works on the front of mine.

[honda300EXtreme]

well besides 250x parts here are some interchangeable parts...

all these front shocks require a relocator bracket
400ex shocks
450 r shocks
yfz 450 shocks
z400 shocks
250r shocks

400ex a-arms
250r a-arms

rear shock
2001 raptor 660 rear
250r rear shock

hopethat helps some...

[SET THE STAGE]

note* 250r shock must be used wiht entire rear end. you can't just use the shock only

[Caseys 300ex]

Ya the 250r needs a linkage which a 300ex does not have in the rear.

[SET THE STAGE]

you'll also have to grind the top sleeve down i believe.

[honda300EXtreme]

yes there correct


what the hell was i thinking :confused:

[SET THE STAGE]

lol not sure.

350x also bolts up with a 350x rear end. but i believe you can use the 300ex axle and brake setup with the swingarm. could be wrong

[67mopar]

im about to get 400ex hubs,rotors and calipers( i already have 400ex a-arms and shocks) and was wondering if i have to use 400ex brake lines and master cylinder? will it be too much slack if i do have to?(sorry if i stole thread, still has to do with interchangeble parts)

[honda300EXtreme]

Originally posted by 67mopar
im about to get 400ex hubs,rotors and calipers( i already have 400ex a-arms and shocks) and was wondering if i have to use 400ex brake lines and master cylinder? will it be too much slack if i do have to?(sorry if i stole thread, still has to do with interchangeble parts)

you can use you old brakelines, and everything else brake related