rear brake bracket

[enantrx]

heres the problem....i did have an '86 swinger...shortened one inch. I bought another '86 stock length swingarm. My problem is that the bolt farthest to the back will not fit into the brake bracket. The edge of the hole is overlapping w/the swingarm. Also the parking brake block off is hitting the swingarm. So..i dont know if i have an '88-'89 brake bracket or what, thanks guys

[deathman53]

the rear brake bracket is the same 86-89. Maybe the bracket was modified along with the swingarm??

[86250rrider]

post a pic

[enantrx]

ok..i was just makin sure there wasnt a diff one i should have. Ill also post a pic up tomorrow..this just has me confused. Oh yeah..another thing i noticed..to tighten the chain..i hafta rotate my LSR carrier up...which is diff from my other swingarm.

[deathman53]

don't worry about that too much, on my 250r's I have the same thing, I guess it matters how you turned the carrier when you intstalled it. It doesn't have a stop in it, like the stock carrier, so you can turn it w/o it hitting.