View Full Version : Hows my plug look?
REDRIDDER
08-21-2007, 10:54 AM
well i thinks its pretty close what do you guys say?
EX LONERIDER
08-21-2007, 11:12 AM
looks a bit on the rich side.
f150mann
08-21-2007, 11:15 AM
i agree
REDRIDDER
08-21-2007, 11:37 AM
if you notice the porcelain area is a taner color and the black is mainly from my accelerator pump, i guess i could go out and try leaning it up another 1/4 turn. I'm running an Edelbrock quick silver so i have a decent amount of adjustments to make before ill have to switch needles.
REDRIDDER
08-21-2007, 12:31 PM
1
REDRIDDER
08-21-2007, 12:32 PM
2
REDRIDDER
08-21-2007, 12:33 PM
3
Pipeless416
08-21-2007, 12:45 PM
you would have to do a plug chop to really test it.
REDRIDDER
08-21-2007, 12:48 PM
how can a plug be white but not lean =good preformance? i had it white with a dark discolor on the threads but the engine was running to lean piniging through my exhaust, but then yet they also say white is good witch is it?
REDRIDDER
08-21-2007, 12:50 PM
Originally posted by Pipeless416
you would have to do a plug chop to really test it. not for nothing but thats what im doing lol...
davetheslave
08-21-2007, 01:13 PM
looks a tad rich to me. But not by a whole lot. Better to be a bit rich than lean though.
Pipeless416
08-21-2007, 02:14 PM
Originally posted by REDRIDDER
not for nothing but thats what im doing lol...
not following.. :confused:
REDRIDDER
08-21-2007, 03:30 PM
Originally posted by Pipeless416
not following.. :confused: You said do a plug chop thats what im allready doing a plug chop.....get it now lol...
casey_lamm
08-21-2007, 03:36 PM
in your second set of pics, id say your pretty close...i would probably leave it there rather then chance running lean...however...whats it feal like... good performance?
Also post pics after you hack up that 2nd plug in the pics...and we can tell you better.
Originally posted by REDRIDDER
You said do a plug chop thats what im allready doing a plug chop.....get it now lol...
REDRIDDER
08-21-2007, 03:38 PM
i will do that after it stops raining out.
Pipeless416
08-21-2007, 03:53 PM
Originally posted by REDRIDDER
You said do a plug chop thats what im allready doing a plug chop.....get it now lol...
simply taking the plug out and looking at it is a plug chop?? :huh
REDRIDDER
08-21-2007, 04:28 PM
thanks guys for all your help, now i havent done this before but when you cut your threads off so that you only see the insulator what will that tell me?
GPracer2500
08-21-2007, 05:31 PM
Originally posted by REDRIDDER
thanks guys for all your help, now i havent done this before but when you cut your threads off so that you only see the insulator what will that tell me?
It shows the "mixture ring" at the bottom of the insulator which is the part of the plug you should be looking at to evaluate a/f ratios. This doesn't work on an old plug. The plug must be new with the only run time being the time it takes to do the test.
You don't always have to actually "chop" the threads off. Sometimes a flashlight and magnifying glass are enough. But in other cases cutting the plug is the only way to really get a good look at what you need to see.
REDRIDDER
08-22-2007, 08:12 AM
thanks alot gpracer2500.
Jerzey 440ex
08-23-2007, 12:58 PM
to change the plug on te 400, what do you do, just unbolt the front fenders and gas tank,
f150mann
08-23-2007, 02:19 PM
what?! why would you unbolt the gask tank or fenders? just pull the plug wire off it and take it out!
86 Quad R
08-23-2007, 03:45 PM
as mentioned the second set looks best. is that based on all around running, low speed or WOT?
REDRIDDER
08-24-2007, 09:32 PM
2nd set all around running
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.