seen this on ebay

[double d 1]

seen a piston and cylinder head on ebay for $139.00 increases size to a 105cc from i think Beatrice cycle. this company any good to deal with ? and making the 90 into a 105 would you notice a change with out doing anything else other than the pipe thats already on it. thanks

[mcatvme]

Never heard of them. Im sure youll feel something as far as power increase goes but what i dont know.

[burkebrothers]

I have dealt with Jack for years, good guy and his stuff works well, you will see an increase with that kit, but I would also suggest porting the head, putting a cam in it with heavy valve springs while you have the head off that will really make the 90 rip and your not talking about a whole lot more $$$$, Jack will be able to hook you up with what you need he knows those motors inside and out

[azextreme]

I order all the time! Also know as DrAtv.com

[double d 1]

thanks guys i'll check it out. ive never tore into an engine like this i think i should be able to handle it, if its just basically removing and older part and putting in a new one.

[double d 1]

made a mistake. its the piston and cylinder for that price not the head. i checked them out and they seem to have a few nice parts. the piston, cylinder , and head with a cam wouldnt be over $400.00 bucks. that seems reasonable. heck i paid 270 for the exhaust from hetricks. i think with all these things my son would have a decent 90 to ride. any thoughts???

[burkebrothers]

I would take the money you are going to spend on a new head and port the stock one, don't forget to have them port the intake to match at the same time. I don't know what carb you have but the stock one may not be able to supply enough fuel after the mods??????

[double d 1]

im just fishin for ideas. maybe buy a head that has been ported with a new cam or send mine off and have it done. naturally the cheaper the better.