gbcap
08-14-2007, 04:12 PM
I am completely tearing a bike down and selling every single part off it. Pictures will come as I tear the bike down and get everything ready for sale. Ill take a picture of the bike whole in the next day or two to give you a good idead of what everything looks like. its all in good shape. it was cleaned and inspected often. kept basically stock all the time.
all parts are shipped price unless otherwise stated.
include 3% for paypal fees. I can't stand loosing the paypal fees. either that or send me a money order. ask other members on my feedback. i am not here to screw anyone. qualityusedparts on ebay, gbc_cap on ebay too.
Not selling Frame or Motor Till other major parts are taken or untill september 1st.
Frame and sub (will seperate) 500 and 150 with title (plus shipping)
Motor - 50-75 hours since new crank bearings. Bearings were pulled after 2 hours of riding and new non recalled bearings were put in place. HRC cam installed as a new bike. vavles were checked/adjusted 6 or 7 times. every 3-4 rides or so. 1750 shipped.
Carb - 115 shipped
spindles - $100 for pair
Stock axle - $75
stock carrier - with new bearings not installed - $65
rear hubs $50 for pair
stock stem $50
COMPLETE wire harness $200 with all computers, coil, rectifier (not seperating) with key
rad (small dent in side, common on all rads) $50
cooling fan $50
stock tank without petcock $25
intake boot $40
front shocks $200
Rear shock $75
rear linkage $35
front calipers $80 for pair
rear caliper $50
stock break lines, make offer
front master cylinder $75 with lever
clutch perch $40 with lever
headlight $75
taillight $50
foot pegs $10
heel guards $5
kick start arm and spindle $30
oil cooler $30
fat bars with adaptor claps to work on stock stem $60 shipped
powdercoated red hubs with new bearings 1 hour of ride time $75 for the pair.
DG wide Grab bar - $50
prm belly skid $65 SOLD!!!
prm s/a skid $40
prm a-arm skids $50
if it is not listed i am keeping some things like the s/a and air box. please ask if you don't see something you need.
ask if you need misc hardware or fender brackets and such
all parts are shipped price unless otherwise stated.
include 3% for paypal fees. I can't stand loosing the paypal fees. either that or send me a money order. ask other members on my feedback. i am not here to screw anyone. qualityusedparts on ebay, gbc_cap on ebay too.
Not selling Frame or Motor Till other major parts are taken or untill september 1st.
Frame and sub (will seperate) 500 and 150 with title (plus shipping)
Motor - 50-75 hours since new crank bearings. Bearings were pulled after 2 hours of riding and new non recalled bearings were put in place. HRC cam installed as a new bike. vavles were checked/adjusted 6 or 7 times. every 3-4 rides or so. 1750 shipped.
Carb - 115 shipped
spindles - $100 for pair
Stock axle - $75
stock carrier - with new bearings not installed - $65
rear hubs $50 for pair
stock stem $50
COMPLETE wire harness $200 with all computers, coil, rectifier (not seperating) with key
rad (small dent in side, common on all rads) $50
cooling fan $50
stock tank without petcock $25
intake boot $40
front shocks $200
Rear shock $75
rear linkage $35
front calipers $80 for pair
rear caliper $50
stock break lines, make offer
front master cylinder $75 with lever
clutch perch $40 with lever
headlight $75
taillight $50
foot pegs $10
heel guards $5
kick start arm and spindle $30
oil cooler $30
fat bars with adaptor claps to work on stock stem $60 shipped
powdercoated red hubs with new bearings 1 hour of ride time $75 for the pair.
DG wide Grab bar - $50
prm belly skid $65 SOLD!!!
prm s/a skid $40
prm a-arm skids $50
if it is not listed i am keeping some things like the s/a and air box. please ask if you don't see something you need.
ask if you need misc hardware or fender brackets and such