PDA

View Full Version : Cut Fenders


99400ex
10-27-2002, 01:33 PM
How do you guys cut your fenders?
2002_300_EX
10-27-2002, 01:58 PM
Jigsaw and some tape.
redrider ex
10-27-2002, 02:30 PM
:D
2002_300_EX
10-27-2002, 03:51 PM
Razor knife would take forever.
crashinmatt
10-27-2002, 03:53 PM
dremels work great. u can cut and sand with the same tool, just change the bits.
flying400ex
10-27-2002, 03:55 PM
I used a roto zip, I used black electrical tape to find the right line than i traced the tape with a black or whatever color crayola washable marker then i took the tape off an checked to see if it was starigt and it was so i cut them. Then i took very fine sand paper, like 120 grit i think and i used a one of theose little electric hand sanders. It looked really crapy and rough until i sanded it. Then i put a bit of armerall on the plastic and shined it up.
RiPPiNiTuP7
10-27-2002, 03:55 PM
I used a chainsaw :huh :blah
KP's lil'300
10-27-2002, 03:55 PM
do a search about it there are plenty of things on here about it. jat KP
flying400ex
10-27-2002, 03:57 PM
My bars are really bent
AtvMxRider
10-27-2002, 04:04 PM
Dremel and tape.

And a razor knife only takes a few minutes.
eldoexrider01
10-27-2002, 07:56 PM
i could cut mine they way i want em if they didnt have those gay warning labels rivited in them. i mean comeone its no foreman we know what these things do and the dealers even tell ya too.
phatswinn
10-27-2002, 08:18 PM
make a even line on both sides with soem electrical tape and break a hacksaw blade in half then tape up the part u hold and cut away, i used a torch to smoot out the edges...seriously
10-28-2002, 10:25 AM
Originally posted by 2002_300_EX
Razor knife would take forever.

only took me about 20 minutes to tape mine off and the use of a utility knife..:huh