blsnelling
08-03-2007, 04:46 PM
First, I have a nearly new 1st size over (+.025") factory piston and rings for a 300EX. It only had a few minutes on the rebuild when a cam adjuster nut let loose and the engine was torn back down. The piston and rings are in LN condition with no damage what so ever. From HondaParsWorld.com, the piston is $61 and rings are $33. I'm not sure if the piston comes with rings. It doesn't appear to. $40 OBO + shipping.
http://tweaker.smugmug.com/photos/180113019-S.jpg
http://tweaker.smugmug.com/photos/180113024-S.jpg
http://tweaker.smugmug.com/photos/180113030-S.jpg
http://tweaker.smugmug.com/photos/180113035-S.jpg
Second, I have a possibly complete 300EX bottom end. I say possible because the clutch cover and a few parts were removed when I got it. I believe most of the pieces are there though. It does include the stator. The head from this engine was used on the engine in my quad. No cylinder available either. The only real problem I see with it is the cam gear on the crank is missing a few teeth. Also, there is some material missing where it apparently threw a chain. There are no holes into the interior. No clutch or starter is included. It's dirty because it's been setting on my garage floor collecting dust for the last few weeks. $150 OBO.
http://tweaker.smugmug.com/photos/180113115-S.jpg
http://tweaker.smugmug.com/photos/180113120-S.jpg
http://tweaker.smugmug.com/photos/180113141-S.jpg
http://tweaker.smugmug.com/photos/180113156-S.jpg
http://tweaker.smugmug.com/photos/180113166-S.jpg
http://tweaker.smugmug.com/photos/180113168-S.jpg
http://tweaker.smugmug.com/photos/180113195-S.jpg
http://tweaker.smugmug.com/photos/180113199-S.jpg
http://tweaker.smugmug.com/photos/180113203-S.jpg
Third, I have a nearly complete clutch assembly. Including basket, steels, fibers, pressure plate, and springs. I may have the bolts but would have to check my box of extra bolts. All items are in great condition. $50 OBO.
http://tweaker.smugmug.com/photos/180113040-S.jpg
http://tweaker.smugmug.com/photos/180113050-S.jpg
http://tweaker.smugmug.com/photos/180113066-S.jpg
http://tweaker.smugmug.com/photos/180113109-S.jpg
http://tweaker.smugmug.com/photos/180113043-S.jpg
http://tweaker.smugmug.com/photos/180113045-S.jpg
Fourth, I have a stock camshaft in good condition. $25 OBO + shipping. SOLD
http://tweaker.smugmug.com/photos/180112980-S.jpg
http://tweaker.smugmug.com/photos/180112985-S.jpg
http://tweaker.smugmug.com/photos/180113017-S.jpg
Fifth, I have a set of imitation carbon fiber hand guards. I'm not sure on the brand. They are in good condition with normal wear from use. $25 OBO + shipping.
http://tweaker.smugmug.com/photos/180113207-S.jpg
http://tweaker.smugmug.com/photos/180112976-S.jpg
http://tweaker.smugmug.com/photos/180113249-S.jpg
http://tweaker.smugmug.com/photos/180113256-S.jpg
http://tweaker.smugmug.com/photos/180113261-S.jpg
Prices do not include shipping. PM me with your offers. If you don't see it in the pics, assume it's not included. Ask if in question. I reserve the right to sell the the buyer that shows me the money first. However, that basically means first come first serve. I'll take either a money order or PayPal to a confirmed US shipping address only.
http://tweaker.smugmug.com/photos/180113019-S.jpg
http://tweaker.smugmug.com/photos/180113024-S.jpg
http://tweaker.smugmug.com/photos/180113030-S.jpg
http://tweaker.smugmug.com/photos/180113035-S.jpg
Second, I have a possibly complete 300EX bottom end. I say possible because the clutch cover and a few parts were removed when I got it. I believe most of the pieces are there though. It does include the stator. The head from this engine was used on the engine in my quad. No cylinder available either. The only real problem I see with it is the cam gear on the crank is missing a few teeth. Also, there is some material missing where it apparently threw a chain. There are no holes into the interior. No clutch or starter is included. It's dirty because it's been setting on my garage floor collecting dust for the last few weeks. $150 OBO.
http://tweaker.smugmug.com/photos/180113115-S.jpg
http://tweaker.smugmug.com/photos/180113120-S.jpg
http://tweaker.smugmug.com/photos/180113141-S.jpg
http://tweaker.smugmug.com/photos/180113156-S.jpg
http://tweaker.smugmug.com/photos/180113166-S.jpg
http://tweaker.smugmug.com/photos/180113168-S.jpg
http://tweaker.smugmug.com/photos/180113195-S.jpg
http://tweaker.smugmug.com/photos/180113199-S.jpg
http://tweaker.smugmug.com/photos/180113203-S.jpg
Third, I have a nearly complete clutch assembly. Including basket, steels, fibers, pressure plate, and springs. I may have the bolts but would have to check my box of extra bolts. All items are in great condition. $50 OBO.
http://tweaker.smugmug.com/photos/180113040-S.jpg
http://tweaker.smugmug.com/photos/180113050-S.jpg
http://tweaker.smugmug.com/photos/180113066-S.jpg
http://tweaker.smugmug.com/photos/180113109-S.jpg
http://tweaker.smugmug.com/photos/180113043-S.jpg
http://tweaker.smugmug.com/photos/180113045-S.jpg
Fourth, I have a stock camshaft in good condition. $25 OBO + shipping. SOLD
http://tweaker.smugmug.com/photos/180112980-S.jpg
http://tweaker.smugmug.com/photos/180112985-S.jpg
http://tweaker.smugmug.com/photos/180113017-S.jpg
Fifth, I have a set of imitation carbon fiber hand guards. I'm not sure on the brand. They are in good condition with normal wear from use. $25 OBO + shipping.
http://tweaker.smugmug.com/photos/180113207-S.jpg
http://tweaker.smugmug.com/photos/180112976-S.jpg
http://tweaker.smugmug.com/photos/180113249-S.jpg
http://tweaker.smugmug.com/photos/180113256-S.jpg
http://tweaker.smugmug.com/photos/180113261-S.jpg
Prices do not include shipping. PM me with your offers. If you don't see it in the pics, assume it's not included. Ask if in question. I reserve the right to sell the the buyer that shows me the money first. However, that basically means first come first serve. I'll take either a money order or PayPal to a confirmed US shipping address only.