HELP! Where to mount rezzies?

[400eXr1d3rZ]

I just got my custom axis shocks today and I put them on but I cannot figure out where to mount the rezzies, does anyone possibly have a picture of where to mount them?

[EX LONERIDER]

i mounted mine on the front down tubes though i just recently changed them to the lower front bars that run horizontally.

http://img211.imageshack.us/img211/1007/picture015lw6.jpg

[400eXr1d3rZ]

Originally posted by EX LONERIDER
i mounted mine on the front down tubes though i just recently changed them to the lower front bars that run horizontally.

http://img211.imageshack.us/img211/1007/picture015lw6.jpg

The rezzie line is too stiff to bend that way, also where the line connect to the rezzy itself is in the way, so I can't seem to get it to fit right there.

[400eXr1d3rZ]

bumpppppp!!!!

[xc_racer1]

how long are the lines?

[400eXr1d3rZ]

Originally posted by xc_racer1
how long are the lines?

I got them mounted, thanks for all your help guys :p

[tar]

Originally posted by 400eXr1d3rZ
I got them mounted, thanks for all your help guys :p

Pics pleaze!:macho

[EX LONERIDER]

Originally posted by 400eXr1d3rZ
I got them mounted, thanks for all your help guys :p

how did you end up mounting them???

[400eXr1d3rZ]

Originally posted by EX LONERIDER
how did you end up mounting them???

Same way you got them mounted.

[mx1791]

PICS!!!!!!!!!!:D

[400eXr1d3rZ]

I can't get pics at the moment, but I'll get them as soon as I can... anyway, I got my rear shock on today...either I mounted the ******* backwards or it's designed to have no place to be mounted...I could mount it on the subframe under the "Rectifier" but i'm afriad that if I bottom out it'll hit the sprocket! Any ideas?

[xc_racer1]

Originally posted by 400eXr1d3rZ
I can't get pics at the moment, but I'll get them as soon as I can... anyway, I got my rear shock on today...either I mounted the ******* backwards or it's designed to have no place to be mounted...I could mount it on the subframe under the "Rectifier" but i'm afriad that if I bottom out it'll hit the sprocket! Any ideas?


my bro put his up near where u mounted the front ones. and it looked good

[400eXr1d3rZ]

Originally posted by xc_racer1
my bro put his up near where u mounted the front ones. and it looked good

The problem is the rezzy line isn't that long.

I need some more help, I need to figure out how to dial in the shocks, but I literally have not a single clue how to do it...all I know how to do is change the compression...which I have no idea even what it is...I know NOTHING about suspension.

[xc_racer1]

ur best bet would be to post a thread in the STEERING AND SUSPENSION forum. theyd know more than us

[TheNewn]

...you went out and bought fully adjustable triple rate custom axis suspension....and didn't do ANY research as to how they work? or how to adjust suspension in general?

Wow. Going for it then are ya? At least you got a good brand. This link may help you out a bit.

http://www.quadmagazine.com/quad/features/article/0,24942,1172631,00.html

[400eXr1d3rZ]

Originally posted by TheNewn
...you went out and bought fully adjustable triple rate custom axis suspension....and didn't do ANY research as to how they work? or how to adjust suspension in general?

Wow. Going for it then are ya? At least you got a good brand. This link may help you out a bit.

http://www.quadmagazine.com/quad/features/article/0,24942,1172631,00.html

Didn't help me.

I need to nkow how to set them up, I can't figure out how to move the clip to adjust the ride height.

[TheNewn]

I imagine all shocks are similar but maybe not. If they're anything like my dads elka's, you unscrew a small alenwrench screw to losen the top 'ring' up then you turn it to push it down or let it go up. This is what adjusts ride hight on the Elka's at least. I think Custom Axis are similar...

Hope this helps.

[400eXr1d3rZ]

Originally posted by TheNewn
I imagine all shocks are similar but maybe not. If they're anything like my dads elka's, you unscrew a small alenwrench screw to losen the top 'ring' up then you turn it to push it down or let it go up. This is what adjusts ride hight on the Elka's at least. I think Custom Axis are similar...

Hope this helps.

Axis is different, I have to compress the spring with my hand and move a clip, that I can't seem to move.

[buster024]

Call the factory.....or maybe ......

http://www.customaxisshocks.com/Custom%20Axis.pdf

[400eXr1d3rZ]

Here's the pic's...

http://www.exriders.com/vbb/showthread.php?s=&threadid=310738