parting out custom trx450r

[REDRON]

I really hate to do it but im just not going to give this bike away so parting it out is my only other option .The only reason i am selling is due to being behind on my bills since my father died over a year ago .Me and him owned a father and son handyman buisness to together .It has been really tough without him so far and i am getting farther and farther behind on bills .I will never find another employee like him .I will try to price all the parts soon but i am taking all reasonable offers on anything you are interested in .The best way to get ahold of me is on my cell 903-736-5130 ron ..I am interested in parting out the engine but will keep it whole for the right price .If this does not go well it will all end up on ebay .

Here is the list of all the custom stuff and all the other stuff is the run of thi mill stock stuff


.Engine has 20 hours on a fresh build .Most parts are brand new or near new on this bike .Title in hand ! The bike is going to need a new voltage regulator plug .It has a short in it .

drg powered stock bore 2005 450r


Engine


51.26 Hp with 33.95 fp Torque and i have the dyno sheet to prove it (dynoed at Little Saharah power sports).
stock bore
stock carb
Baldwin 14-1 piston
stage 2 hot cam
Drg porting and three angle valve job
stock springs and stock valves
Dynatek programable igniton reprogramed by Drg
Dasa full exhaust with high heat wrap
Tusk brand clutch pack
Vortex billet clutch basket
Upp case saver
K and N intake filter
K and N air box lid

Chassis

Stock frame and sub frame (powder coated by east Texas powder coat)
maier frame guards
Ims roll design double wide foot pegs
Ims roll design heel guards
pep rear upper chain roller

Suspension

Allba racing plus 2 inch chrome arms
T-dub plus 2.5 inches swing arm (powder coated black)
Quadtech alum front hubs
Derisi Pro Millennium triple rate front motocross shock set up
Derisi Pro Millennium duel rate rear motocross shock and link
Dirt skinzs front and rear neoprene shock covers


Controls

Pro taper atv mid high black bars
Scott waffle grips
Crf clutch perch and hot start lever
Laegers Plus 1 inch steering stem and anti vibe mount
Lone star steering stem block
Front and rear steel braided brake lines
Noss machine rear brake block off
extreme billet throttle TRX throttle cover
extreme billet front brake res. cover

Body

stock black plastic race/dune cut
Lone star fender fix kit
maier front white hood
chrome skull and cross bonez on hood
Ims over sized clear tank
Tusk alum gas cap
Stock seat with 2 inches of foam added and custom two tone seat cover
Lone star seat latch


Everything else


lone star twin row bearing carrier
Trail tech Hid head lights
Rad man. axle nut
ars fx air box lifter kit
Tiny tach and hour meter
Everything that is stock and is alum spent countless hours on the
buffing wheel to get that like chrome polished finish

http://i9.photobucket.com/albums/a75/shootgun/100_0669.jpg
http://i9.photobucket.com/albums/a75/shootgun/100_0670.jpg
http://i9.photobucket.com/albums/a75/shootgun/100_0673.jpg
http://i9.photobucket.com/albums/a75/shootgun/100_0672.jpg

[procircuit406ex]

Replied to your thread over on QZ, let me know.

Tyler

[REDRON]

Originally posted by procircuit406ex
Replied to your thread over on QZ, let me know.

Tyler

posted a message to you over there .

[procircuit406ex]

You did?:confused: I didnt get it...

[REDRON]

Ok i promised prices on everything so here they are

***All Items Include Shipping Charges***

ALL PRICES ARE OR BEST OFFER !


Frame & Sub-frame with title powdercoated white $900
Engine $2800
A-Arms chrome $500
Front Braided Brake Lines $45
Radiator $75
Radiator Fan $30
Swing Arm (Painted Black) $280
Shocks (All 3 Set for 190-220 lbs.) includes link done be derisi racing $900
Bars $30
Thumb Throttle w/ Billet Honda Wing Cover $50
K&N Filter $30
K&N Filter (Broken Tab in Back; Still Mounts and works fine i have tabe and could be put back on ) $25
K&N Air Box Lid $75
Pipe $400
Front Bumper(polished $35
Rear Grab Bar(polished)$28
Tail Light $40
PEP Rear Chain Roller $30
Polished Brake Pedal $25
Polished Kicker $35
Polished Shifter $30
Axle $40
Plastic $150
Air Box $45
Dynatek Ignition (Reprogrammed By DRG) $300
Case Saver(upp brand Hard plastic rubber kind) $30
Maier Frame Guards $25
Dirt Skinz Neoprene Shock Covers $45
Lone Star Steering Stem Block $30
Lone Star Seat Latch $35
Electrical System (Needs Regulator Plug) $35
CDI (Stock) $20
Volt Regulator $25
Coil $25
Start/Run Cluster $25
Stainless Steel Allen Head Bolt Kit for Entire Quad $60



***SOLD***
Tank
Front Dune Tires
Stem & Claps
Seat
Clutch Perch
hid lights with mounting hardware
ims pegs
ims heel guards
carb
tiny tach
lone star carrier
spindals
ars fx airbox lifter
Front hubs w/rotors
Front and rear calipers w/bolts
Rear Hubs
Front master cylinder
38T sprocket
chain
rear rotor and hub
RAD axle locknut
2nd set of hid lights
rear haulers
hood
rear braided brake line

[REDRON]

bump

[Sjorge450R]

Originally posted by REDRON
bump

$35 for the front brake lines?

[REDRON]

Originally posted by Sjorge300EX
$35 for the front brake lines?


40 and they are yours .paypal is quadfreak1@gmail.com

[REDRON]

.If you are interested in any parts please make an offer and get it while its hot .I think i will keep this stuff on her for a couple more days and the rest will go on ebay.I will have alot of extras to go on ebay like stock wheels and tires,a wide assortement of rear sprockets new cables and more.

[Sjorge450R]

Originally posted by REDRON
.If you are interested in any parts please make an offer and get it while its hot .I think i will keep this stuff on her for a couple more days and the rest will go on ebay.I will have alot of extras to go on ebay like stock wheels and tires,a wide assortement of rear sprockets new cables and more.

im really interested. I just wanna know what size the lines are.

[REDRON]

the lines are good for up to plus three

[REDRON]

list has been updated

[Sjorge450R]

how much for the hood. Those lines are too long for me.

[REDRON]

Originally posted by Sjorge300EX
how much for the hood. Those lines are too long for me.


how are the lines too long ?They were orginaly purchased and used on stock a arms .They are dual lines and are not too long for stock up to 3 inches .You get more adjustability out of duel lines because the are not attatched at a T down at frame and the can spread out for wider arms or be routed togther for stock width arms .

The hood is sold .

[Sjorge450R]

Originally posted by REDRON
how are the lines too long ?They were orginaly purchased and used on stock a arms .They are dual lines and are not too long for stock up to 3 inches .You get more adjustability out of duel lines because the are not attatched at a T down at frame and the can spread out for wider arms or be routed togther for stock width arms .

The hood is sold .

alright how far off the cylinder does the dual line stick off? I have been told about it sticking off pretty far and can cause i problem in a wreck.

[quad355]

how much for the tank thanks.

[REDRON]

Originally posted by Sjorge300EX
alright how far off the cylinder does the dual line stick off? I have been told about it sticking off pretty far and can cause i problem in a wreck. mabye another 1/4 of an inch if that .I have been running duel lines for a while now and had plenty of wrecks with no problems .

[REDRON]

Originally posted by quad355
how much for the tank thanks.

tank is on the sold list

[Sjorge450R]

can you throw in the line clamps? If so i will paypal money over ASAP.

[REDRON]

Originally posted by Sjorge300EX
can you throw in the line clamps? If so i will paypal money over ASAP.

I got rid of the line clamps as soon as i got my chrome a arms so they wouldnt rub .

[jduran]

whats the best price for the rims and tires ship 08835 let me knoe later pm me or im me at xcaramelo17@hotmail.com

[REDRON]

Originally posted by jduran
whats the best price for the rims and tires ship 08835 let me knoe later pm me or im me at xcaramelo17@hotmail.com


what rims and tires ?

[REDRON]

OOk interenet has been down for several days .I will be shipping all parts sold this week .I have been working late every day and besides i couldnt get on the internet to ship anyhow .Please everyone bear with me and you will get your item in a timely manner .

This is a list of whats left .I HAVE DROPPED THE PRICES !.I would like to move the rest of this stuff in the next few days .ALL PRICES ARE HIGHLY NEGOTIABLE !I really dont want to have to list anything on ebay so please buy this stuff or let someone know who is looking for it .

***All Items Include Shipping Charges***

ALL PRICES ARE OR BEST OFFER !


Engine $2500 20 hours on a fresh build 52hp engine
A-Arms plus 2 inch chrome like new $450
Front Braided Brake Lines $40
Radiator Fan $28
Shocks (All 3 Derisi pro millinium Triple rate fronts and duel rear Set for 190-220 lbs.) includes link done by derisi racing (20 hours on them since built) $875
Bars pro taper black like new $28
Thumb Throttle w/ Billet Honda Wing Cover $48
K&N Filter $28
K&N Filter (Broken Tab in Back for stock mounting bolt Still clamps and works fine i have tab and could be put back on ) $23
K&N Air Box Lid new one ride $70
Front Bumper(polished $32
PEP Rear Chain Roller $28
Polished Brake Pedal $24
Polished Kicker $33
Polished Shifter $28
Axle $38
Plastic $145
Air Box $43
Dynatek Ignition (Reprogrammed By DRG) $275
Maier Frame Guards $24
Dirt Skinz Neoprene Shock Covers $42
Lone Star Steering Stem Block $28
Electrical System (Needs Regulator Plug) $30
CDI (Stock) $18
Coil $23
Start/Run Cluster $24
Stainless Steel Allen Head Bolt Kit for Entire Quad $45

[REDRON]

bump

[blue450r]

Did you happen to ship out the case saver yet? Thanks.

[Sjorge450R]

do you still have the part of the linkage that hooks to the swinger?

[REDRON]

Originally posted by Sjorge300EX
do you still have the part of the linkage that hooks to the swinger?

You mean the dogbone ? If so yes and it has been polished to a mirror like shine .

[REDRON]

All prices are or best offer .I need to sell this stuff quick so make your offers and if its good its yours .

[Sjorge450R]

Originally posted by REDRON
You mean the dogbone ? If so yes and it has been polished to a mirror like shine .

how much?

[Chin_Chilla]

Have you shipped my wheels and tires? Payment cleared Fri 8/10 and haven't heard anything from you. I've sent several PM's too...

[REDRON]

Originally posted by Chin_Chilla
Have you shipped my wheels and tires? Payment cleared Fri 8/10 and haven't heard anything from you. I've sent several PM's too...

You should see them any day now .

[REDRON]

Originally posted by Sjorge300EX
how much?

40 shipped

[Chin_Chilla]

Originally posted by REDRON
You should see them any day now . Alright I'll keep an eye out. Thanks!

[REDRON]

I have listed about 10 of the items on the list thats left on ebay .The rest will go on tonight .If anyone is interested in a link to the ebay auctions just pm me and i will give it to you .