how do efi cntrollers hook up?

[450raider]

i was just wondering, when you get a pipe or something and then adjust the efi, is there a plug somewhere that you just plug in and adjust and take back out or is there installation required?

thanks

[mod440ex]

i put in a dobock efi controller and there were 3 connections:

1. plugin to the injector
2. stock wire harness plugged into efi controller
3. ground to the battery

i have my controller mounted under the front hood with some velcro tape.

[QUADROOKIE]

[QUOTE]Originally posted by mod440ex
i put in a dobock efi controller and there were 3 connections:

1. plugin to the injector
2. stock wire harness plugged into efi controller
3. ground to the battery

i have my controller mounted under the front hood with some velcro tape. [/QUOTE
Can anyone tell me where these connectors are at? I am not seeing anything that the controller will plug into?

[mod440ex]

the injector is under the tank. just unplug the wire harness from it and plug in the one for the controller, then there should be another wire plug in on the controller that will plug into the stock wiring harness. then is all you should have to do is ground it and figure out where you want to put your controller

[renslip6990]

go to motoworks.com and it shows you everything how to install. Its not difficult and it will be the same for the other dobock controllers that you may use. heres a link.
http://motoworks.com/05technical/01install_inst/img/fmi_isheets/80-5001_I-Sheet.pdf

[QUADROOKIE]

I figured it out-Thanks!