Lug Nuts

[TRXRIDER4567]

i had my stock rims and the lug nuts fit on them. but i got new rims doulas blue labels. and the hole where the bolt goies through is smaller so there is no room for the lug nuts tapered end to go in.

[400exrider707]

Originally posted by TRXRIDER4567
i had my stock rims and the lug nuts fit on them. but i got new rims doulas blue labels. and the hole where the bolt goies through is smaller so there is no room for the lug nuts tapered end to go in.

You need to get a set of 10mm flange nuts. Your local dealer should have them, or you can get them at rocky mountain. OR you could just turn your stockers around so the flat edge goes against the rim. I prefer the flange nuts. DO NOT run the tapered edge into the rim, they will be nearly impossible to get the rims off the hubs.

[bwamos]

Or you can buy some aluminum washers, and flip the stock lug nuts around so the flat side is up against the washer.

I've been running mine that way for years.