riding4fun
07-24-2007, 06:50 AM
When I was playing with the jetting on the 50 I put the needle 1 click under the stock setting. It ran great in the mid but suffered in the top end.
Is there a way to combat this with changing the main jet? It would scream from 1/4 throttle thru 3/4 throttle. But would kinda bog down with full throttle. I let off the throttle a little and it started screaming again.
Is there a way to combat this with changing the main jet? It would scream from 1/4 throttle thru 3/4 throttle. But would kinda bog down with full throttle. I let off the throttle a little and it started screaming again.