BEARAZZ
07-23-2007, 04:50 PM
It is in good shape and the motor probably has around 10 or 15 good rides on it..here is a list of the parts..
1500--- 416 motor with a stage 2 hotcam and barnett clutches
50 -------stock carb jetted but cannot remember what
225----LRD full exhaust
25---- white bros cdi
20---- K &N air filter
400----Fox float shox on front
175--- Works rear shock... it is a little soft but i bought it used and don't know what it is set up for..
350---- Burgard + 3 a-arms chrome and chrome tie rods
250---Burgard +2 swingarm.. It has 2 hair line cracks They will be TIG welded but the chrome will be messed up in them areas.
200----Dura Blue 2+2 axle with aluminum wheel hubs and sprocket hub
100---Dura Blue anti fade brake hub ( this is for a 250R rotor and caliper )
15---Pro design kill switch
100---AC Pro Peg nerfs
200--stock honda wheels with around 50% tread razors
125--- seat and plastic.. Seat is near perfect ..Plastic is in fair shape.. No major cuts but is scratched up.. Only thing is the front left tab is broken.. when cleaned up and
armorall on it it looks great
10--Nacs headlight protectors
400---Frame is in good shape but the subframe has a little tweak to it
75--- rear caliper , line, and rotor (the caliper and rotor are 250R)
100--- front calipers
60--- front hubs and rotors
75--- complete wiring harness except cdi
40--- front master cylinder
30--rear master cylinder
I know i forgot some stuff but if there is anything you need then let me know.. And i am not gonna sell anything until i know the most of it is gone.. I don't wanna be stuck with half a 4-wheeler.. T
hanks for looking... I would take 3,000 for the whole ride.. If you would rather buy it ready to go
1500--- 416 motor with a stage 2 hotcam and barnett clutches
50 -------stock carb jetted but cannot remember what
225----LRD full exhaust
25---- white bros cdi
20---- K &N air filter
400----Fox float shox on front
175--- Works rear shock... it is a little soft but i bought it used and don't know what it is set up for..
350---- Burgard + 3 a-arms chrome and chrome tie rods
250---Burgard +2 swingarm.. It has 2 hair line cracks They will be TIG welded but the chrome will be messed up in them areas.
200----Dura Blue 2+2 axle with aluminum wheel hubs and sprocket hub
100---Dura Blue anti fade brake hub ( this is for a 250R rotor and caliper )
15---Pro design kill switch
100---AC Pro Peg nerfs
200--stock honda wheels with around 50% tread razors
125--- seat and plastic.. Seat is near perfect ..Plastic is in fair shape.. No major cuts but is scratched up.. Only thing is the front left tab is broken.. when cleaned up and
armorall on it it looks great
10--Nacs headlight protectors
400---Frame is in good shape but the subframe has a little tweak to it
75--- rear caliper , line, and rotor (the caliper and rotor are 250R)
100--- front calipers
60--- front hubs and rotors
75--- complete wiring harness except cdi
40--- front master cylinder
30--rear master cylinder
I know i forgot some stuff but if there is anything you need then let me know.. And i am not gonna sell anything until i know the most of it is gone.. I don't wanna be stuck with half a 4-wheeler.. T
hanks for looking... I would take 3,000 for the whole ride.. If you would rather buy it ready to go