300ex Suggestions (need some help).

[atvmaster0927]

I recentally got a stock 300ex and would like to know what i should put on it. I want great suspention and i want it to be VERY FAST. I want to race it, next year. So i guess like i need to build an mx 300ex. So please can someone tell what i should get on it.

P.S. I don't have a budget.

Thanks.

[honda300EXtreme]

well i would start with
a pipe ( curtis sparks or hmf full system)
k&n air filter
ehs air box lid
14 tooth front sprock
aftermarket cdi

as for suspension i would go with +2 a-arms with (axis or tcs or motowoz shocks)
lonestar adjustable axle

then if you want to dig into the engine
11:1 piston
webcam (you would have to pick the one you want for where you want the power)
hard face rockers


if thats not enogh i would go with a 330 or 350 bore kit


then i would get some skid plates (pro-armor) and nerfbars

and a kill switch

some handle bars (faast flex)


i think thats it

trust me that there will be pretty expensive.. but you said you had no budget

;)

[Ryan22]

his motor stuff sounds good but with suspension if i didn't have a budget like in my dreams i would get +3 400ex a arms or +2 450 that might be wat he ment and 450r PEP shocks and in the rear get a PEP shock with a +2 swingarm from jb or lonestar i don't have PEP's but all the kids that win in the youth production class have them thats y i said PEP rather than axis and the other shocks and just send the motor to sparks and say make it fast and he'll do it u won't get it back for a few months unless your loaded like it sounds then he'll get it back to u pretty quick

[TWISTED DINLI]

i would go with TC motor and exhaust. then since you dont have a budget get PEP shocks or Axis, with roll design a-arms or walsh a-arms.

[hondarider110]

start with
a pipe (sparks or yoshimura)
uni air filter
14 tooth front sprock
cdi
suspension i would go with +2 JB a-arms with (axis, tcs,motowoz or pep shocks)
lonestar adjustable axle
JB swing arm +2

11:1 piston
webcam
hard face rockers

rath nerf,grab bar, bumper,
and asv levers

[atvmaster0927]

At what site can i find all these mods?

[honda300EXtreme]

talk to colby at c&d on this site hes one of the sponsers, he can probably find you everything at a pretty good price

[atvmaster0927]

I have one more question. What kind of tires should i get? (I want to race and also do some trailriding.)

[honda300EXtreme]

personally i like the dunlop kt-335 for rears, and the kt-331 fronts

[honda250xrider]

i would only go lt for the front end those stockers and most aftermarket shocks just dont get the job done, simply u need more travel than what u got, there are companies out there now willing to build lt a-arms for the 300ex

[Justin#38]

If you want to race your 300 in a local series or national events i dont think you can go higher than 300cc. So i would not advise you to put a 330 kit in it.


heres some pics of my bike. you can see i have elka shocks with jb racing a-arms awsoem setup


http://i123.photobucket.com/albums/o311/quadracer338/2007atvracebike004.jpg

[elementryder]

ok a tc motor and exaust
axis shocks
burgard long travel 400ex +3 a-arms
shock relocator
+2 burgard swinger
rpm axle

[400exrapes]

ATVMASTER when you selll your polaris trailblazer you can worry about your 300ex. In youth production royce's slip on pipe on his 300 could take every kid on there u need to be a good racer. They all have full piped blasters thats it u dont need anything i dont thinku'll even hit the jumps lmao

[bwamos]

Originally posted by Justin#38
If you want to race your 300 in a local series or national events i dont think you can go higher than 300cc. So i would not advise you to put a 330 kit in it.

Depends on the series. It's about 50/50. Some require max 300cc. Others are max 350cc. He should look up the limitations for any series' he plans on running.

[400exrapes]

Its youth production hes looking to ride in max 300cc 4 stroke max 200cc 2 stroke.