PDA

View Full Version : lasleeve big bore


fastR
07-22-2007, 12:56 PM
are the la sleeve 310s any good, i was gunna get one then get it ported and stuff, or i was gunna get a esr 310 pv, which would be bettter
zedicus00
07-22-2007, 02:12 PM
the la sleeve kit goes in a stock jug. if set up right they can be great. whatch the head gasket on them.

the ESR is a procross cylender. if cost is no issue get a procross jug and hav a reputable builder port it, like c-leigh racing. ESR's porting is spotty at best.

the la sleeve kits can be made to run great and if yur on a smaller budget might be the way to go, either way the porting can make all the difference.
Aceman
07-22-2007, 04:18 PM
LA Sleeve sells a Pro-x 310 cylinder also, it's what I have..........
racerx573
07-24-2007, 03:12 AM
Ballance used to run the LRD300 resleeve on a stock jug. VERY reliable set up. My cousin runs the same kit on his Lobo R, MFer runs!!!! It will walk away from the regular "310" kits (which are only 295cc by the way).

Give LRD a call about having yours done...
http://www.lrdperformance.com/cgi-bin/shop/category_detail.cgi?id=90000-002&cat=Engine%20Kits&atv=Honda%20250R