06 wont start

[jsu101]

Well where do i start.
06er with brand new motor(crank,piston,jug,head,stage 1 cam) all factory honda parts but cam. got spark,fuel,spins over good but nothin. Doble checked timing and it looked to be on. there is fuel in the bowl. i have checked spark with 2 diff plugs. where do i look next need help:ermm:

[TRX450RACER174]

Double check your carb connections, make sure everything is tight and connected,valve clearance is that correct.:)

[jsu101]

Originally posted by TRX450RACER174
Double check your carb connections, make sure everything is tight and connected,valve clearance is that correct.:)


I set it all to factory specs. Im going to pull the carb and check it next and see if that is it

[jsu101]

It is running:D :D :D

the decompression was to tight so the was no compression

[TRX450RACER174]

Good to hear now break it in and go out and ride.

[jsu101]

well i would but on the ride it blow up:mad: :chinese: :mad: :mad: :mad: :mad:

[450rJam]

are you supose to use stock valve clearance with the aftermarket cam ?

Im running the hrc cam on the 06 style and its not the stock spec.

[jsu101]

something in the bottom end let go:grr: