87250rxrider
07-20-2007, 06:16 PM
so, i just recently started building my 2nd 250r in 2 years. i just figured i'd post my progress though the build here so i could see what all of you 250r owners think.
mods:
-'86 250r frame with modified rear engine bracket
-450r rear swingarm PC'd orange
-400ex durablue +4 adj axle
-400ex rear brake assy including master cylinder
-Bills pipe and silencer
-Herrmann racing bearing carrier
-Houser +3 LT a-arms
-Elka quad rate piggy back LT shocks
-265 long rod motor
-V force reeds
-Keihin 38mm carb
-ESR airbox eliminator kit
-complete 400ex front brake system w/ hubs and spindles
-custom made wiring harness
-QT carbon fiber radiator scoops
-Fluidyne oversize aluminum radiator
-banshee rear shock
-Tag T2 bars w/ oversized raised bar clamp
much more on the way including duncan bumper, grab bar, skid plate, cylinder head, seat, tank cover and hood scoop.
it currently squats the rear end b/c the custom shock linkage is not done, so the shock is just bolted into the swinger for now.
here are pics as the build progressed:
450r swinger w/ 400ex axle/ brake setup:
http://www.imagestation.com/picture/sraid225/pfa923354a041ff99cd73762b983fce5b/e8c30219.jpg
400ex master cylinder w/ custom made extension:
http://www.imagestation.com/picture/sraid225/p589d61594f5f2d4eb1343e91a2eadc9b/e8c2ffcc.jpg
rolling chassis:
http://www.imagestation.com/picture/sraid225/p6eaa9158b86e5bddeb157c6f27c32f93/e8c2fddd.jpg
rolling chassis + fenders and bar clamp:
http://www.imagestation.com/picture/sraid225/p17f4eef914fd7261431e0e85f5c99cf9/e89f7608.jpg
gettin there... motor's in it:
http://www.imagestation.com/picture/sraid225/p0157ab388949cd6ab5a019fd20bf48a8/e87db8d4.jpg
another:
http://www.imagestation.com/picture/sraid225/peb2e903202d5e1e2a769c006c4bf1299/e87db73c.jpg
front end:
http://www.imagestation.com/picture/sraid225/p270835cfb83df2c7707cb1d702e551d6/e87db5cc.jpg
rear end:
http://www.imagestation.com/picture/sraid225/pdce535070f26659ce9237fbb964f5b22/e87db47c.jpg
thats it for now. i'll have some more when i finally get the rest of the parts.
-Ryan
mods:
-'86 250r frame with modified rear engine bracket
-450r rear swingarm PC'd orange
-400ex durablue +4 adj axle
-400ex rear brake assy including master cylinder
-Bills pipe and silencer
-Herrmann racing bearing carrier
-Houser +3 LT a-arms
-Elka quad rate piggy back LT shocks
-265 long rod motor
-V force reeds
-Keihin 38mm carb
-ESR airbox eliminator kit
-complete 400ex front brake system w/ hubs and spindles
-custom made wiring harness
-QT carbon fiber radiator scoops
-Fluidyne oversize aluminum radiator
-banshee rear shock
-Tag T2 bars w/ oversized raised bar clamp
much more on the way including duncan bumper, grab bar, skid plate, cylinder head, seat, tank cover and hood scoop.
it currently squats the rear end b/c the custom shock linkage is not done, so the shock is just bolted into the swinger for now.
here are pics as the build progressed:
450r swinger w/ 400ex axle/ brake setup:
http://www.imagestation.com/picture/sraid225/pfa923354a041ff99cd73762b983fce5b/e8c30219.jpg
400ex master cylinder w/ custom made extension:
http://www.imagestation.com/picture/sraid225/p589d61594f5f2d4eb1343e91a2eadc9b/e8c2ffcc.jpg
rolling chassis:
http://www.imagestation.com/picture/sraid225/p6eaa9158b86e5bddeb157c6f27c32f93/e8c2fddd.jpg
rolling chassis + fenders and bar clamp:
http://www.imagestation.com/picture/sraid225/p17f4eef914fd7261431e0e85f5c99cf9/e89f7608.jpg
gettin there... motor's in it:
http://www.imagestation.com/picture/sraid225/p0157ab388949cd6ab5a019fd20bf48a8/e87db8d4.jpg
another:
http://www.imagestation.com/picture/sraid225/peb2e903202d5e1e2a769c006c4bf1299/e87db73c.jpg
front end:
http://www.imagestation.com/picture/sraid225/p270835cfb83df2c7707cb1d702e551d6/e87db5cc.jpg
rear end:
http://www.imagestation.com/picture/sraid225/pdce535070f26659ce9237fbb964f5b22/e87db47c.jpg
thats it for now. i'll have some more when i finally get the rest of the parts.
-Ryan