firefighterjosh
07-17-2007, 01:00 AM
Alright I am trying to wiring in a kill switch to my King quad 700 EFI.
Only way is to wire it to my wire for my stock switch kill switch here is the problem.
Take a look at my paint drawing below.
That is what my kill switch looks like opened up. When the switch is in the RUN/ON position. The red and orange/white wires are in a circuit together. When the stock switch is in the off position it breaks the connection, which makes the king not run.
When I put a pro design kill switch up to it it will run without the tether in (complete curcuit) but when I put the tehter in it breaks the circuit which makes my king not run.
So any help would be great.
Only way is to wire it to my wire for my stock switch kill switch here is the problem.
Take a look at my paint drawing below.
That is what my kill switch looks like opened up. When the switch is in the RUN/ON position. The red and orange/white wires are in a circuit together. When the stock switch is in the off position it breaks the connection, which makes the king not run.
When I put a pro design kill switch up to it it will run without the tether in (complete curcuit) but when I put the tehter in it breaks the circuit which makes my king not run.
So any help would be great.